Billy Huddleston wrote: > I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E > controller. I've googled all over the place and found a few different > drivers for RHEL5 for it.. and tried a few of them.. Some will load, > some complain that this isn't the correct version.. non of them work > when it comes to showing Hard Drivers in the partition manager. The > machine is a Supermicro SYS-6015V-M3 server. Any help would be appreciated. >
found a thread [1] on a ubuntu forum talking about a similar SuperMicro board with a 1068E, if you weed through the thread, says there's a jumper JPA2 on the board, if the jumper is in one position, the board uses the Fusion_MPT driver and appears as JBOD, in the other position its Megaraid_SAS but didn't work with ubuntu without much fussing aorund including flashing an updated LSI 1068E firmware onto the board (which is NOT the regular BIOS, furhter, they had to contact SM to get this updated firmware as its specific to the exact board revision you have) [1] http://ubuntuforums.org/archive/index.php/t-973912.html <http://ubuntuforums.org/archive/index.php/t-973912.html> _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
