On Dec 30, 2009, at 1:05 AM, Noob Centos Admin <centos.ad...@gmail.com> wrote:
> Hi, > >> Try blocking the IPs on the router and see if that helps. > > Unfortunately the server's in a DC so the router is not under our > control. That sucks, oh well. >> You can also run iostat and look at the disk usage which also >> generates load. > > I did try iostat and its iowait% did coincide with top's report, which > is basically in the low 1~2%. > > However, iostat reports much lower %user and $system compared to top > running at the same time so I'm not quite sure if I can rely on its > figures. Yes, I'm not sure iostat's CPU numbers represent the full CPU utilization, or only the CPU utilization for IO. >> How many cores does your machine have? Load avg is calculated for a >> single core, so a quad core would reach 100% utilization at a load of >> 4, but high iowaits can generate an artificially high load avg as >> well >> (and why one sees greater than 100% utilization). > > It's a dual core that's why I was getting concerned since loads above > 2.0 would imply the system's processing capacity was apparently maxed. > However, load and percentages don't add up. They never do because of the time scaled averages. > For example, now I'm seeing > top - 14:04:30 up 171 days, 7:14, 1 user, load average: 3.33, > 3.97, 3.81 > Tasks: 246 total, 2 running, 236 sleeping, 0 stopped, 8 zombie > Cpu(s): 13.3%us, 16.0%sy, 0.0%ni, 67.5%id, 3.0%wa, 0.0%hi, > 0.2%si, 0.0%st > > iostat > Linux 2.6.18-128.1.16.el5xen 12/30/2009 > avg-cpu: %user %nice %system %iowait %steal %idle > 3.28 0.20 1.16 2.38 0.01 92.97 > > >> I really wish load would be broken down as CPU/memory/disk instead of >> the ambiguous load avg, and show network read/write utilization in >> ifconfig. > > Totally agreed. All the load number is doing is telling me something > is using up resources somewhere but not a single clue otherwise! > Confusing, frustrating and worrying at the same time :( Maybe someone could write a command-line utility that outputs the system load broken down into CPU/memory/disk/network. Call it 'sysload' and take the system configuration into account. Take a look at your iptables setup, make sure the blocked ip rules are checked first before any other and drop the packets without any icmp (give em a black hole to stare at). -Ross _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos