Jason Pyeron wrote: > Unfortunatly, there is no option to change this. I will search for a new BIOS > for it, but as the system will be running off a flash drive in production I am > not in a hurry. >
you might just see if you can enable DMA with the hdparm command. first off... # hdparm -i /dev/hdb I only have a IDE cdrom handy on on a centos 5 box (my HD's are all scsi, hardware raid, or fiberchannel), it displays... # hdparm -i /dev/hda /dev/hda: Model=TEAC CD-ROM CD-224E, FwRev=K.9A, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no * signifies the current active mode note the * mode. in my case, its udma2 which is fairly fast (I believe 66MB/sec). a modern hard drive should do udma3 or 4 (100 or 133Mhz). try... # hdma -Xudma3 /dev/hdb .dev/hda: setting xfermode to 100 (UltraDMA mode3) use at your own risk. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos