On 11/18/2010 01:11 PM, Roberto Nunnari wrote: > Hello. > > A couple of years ago I installed two file-servers > using kickstart. The server has two 1TB sata disks > with two software raid1 partitions as follows: > > # cat /proc/mdstat > Personalities : [raid1] > md1 : active raid1 sdb4[1] sda4[0] > 933448704 blocks [2/2] [UU] > md0 : active raid1 sdb1[1] sda2[2](F) > 40957568 blocks [2/1] [_U] > > > Now the drives are starting to be failing and next week I'll > backup /homes, reinstall OS with kickstart, and finally > restore /homes. > > There's a problem with how the kickstart process partitions > the disks, though. As you may have noticed above, md0 is made > up of sdb1 and sda2. > > Could anybody help me understand how to make the partitions > on the two drives identical still using kickstart? > > Here's the relevant part from the kickstart file: > > zerombr yes > clearpart --all --initlabel > bootloader --location=mbr > part /boot --fstype ext3 --size 250 --asprimary --ondisk sda > part swap --size 2048 --asprimary --ondisk sda > part raid.01 --size 40000 --asprimary --ondisk sda > part raid.03 --size 1 --grow --asprimary --ondisk sda > part /boot2 --fstype ext3 --size 250 --asprimary --ondisk sdb > part swap --size 2048 --asprimary --ondisk sdb > part raid.02 --size 40000 --asprimary --ondisk sdb > part raid.04 --size 1 --grow --asprimary --ondisk sdb > raid / --level=1 --device=md0 --fstype ext3 raid.01 raid.02 > raid /home --level=1 --device=md1 --fstype ext3 raid.03 raid.04 > > ..but here's the produced partitioning on the two drives: > > # parted /dev/sda print > Disk geometry for /dev/sda: 0.000-953869.710 megabytes > Disk label type: msdos > Minor Start End Type Filesystem Flags > 1 0.031 251.015 primary ext3 boot > 2 251.016 40248.786 primary ext3 raid > 3 40248.787 42296.132 primary linux-swap > 4 42296.133 953867.219 primary ext3 raid > > # parted /dev/sdb print > Disk geometry for /dev/sdb: 0.000-953869.710 megabytes > Disk label type: msdos > Minor Start End Type Filesystem Flags > 1 0.031 39997.771 primary ext3 boot, raid > 2 39997.771 42045.117 primary linux-swap > 3 42045.117 42296.132 primary ext3 > 4 42296.133 953867.219 primary ext3 raid > > > I'm not asking because I'm picky, but just because, it would > have made my life easier to fix bad blocks on disks by > dd from good block on disk1 to bad block on disk2, and as > next week I'll reinstall, I'd prefer to do it the right way. > > Some more bits about my environment: > > # cat /etc/redhat-release > CentOS release 4.8 (Final) > > # uname -rms > Linux 2.6.9-89.0.18.ELsmp i686 > > Thank you and best regards. > Robi
I've got a fairly simple script in a kickstart file I use[1] that handles RAID 1 and RAID 5 partitioning. Perhaps it would help? Here is the relevant snippet: zerombr clearpart --all --initlabel --drives=sda,sdb ignoredisk --only-use=sda,sdb bootloader --location=mbr --driveorder=sda,sdb --append="crashkernel=auto" # /boot part raid.01 --ondisk=sda --asprimary --size=256 part raid.02 --ondisk=sdb --asprimary --size=256 # / part raid.11 --ondisk=sda --asprimary --size=40960 part raid.12 --ondisk=sdb --asprimary --size=40960 # <swap> part raid.21 --ondisk=sda --asprimary --size=4096 part raid.22 --ondisk=sdb --asprimary --size=4096 # Format /boot and /. raid /boot --fstype=ext3 --level=1 --device=md0 raid.01 raid.02 raid / --fstype=ext3 --level=1 --device=md1 raid.11 raid.12 raid swap --fstype=swap --level=1 --device=md2 raid.21 raid.22 The kickstart script above is specifically for RHEL 6, but it came nearly unadapted from an older CentOS 4 kickstart script. The only line that might be an issue is: "crashkernel=auto". hth, Digimer 1. http://wiki.alteeve.com/files/an-cluster/ks/generic_server_rhel6.ks -- Digimer E-Mail: digi...@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos