Hi all, Read many posts on the subject.
Using 802.3ad. Few problems; Cannot ping some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway. When cold booting it somewhat works, some hosts are pingable while others are not. When restarting the network service via /etc/init.d/network, nothing is pingable. Here are my configs; ifcfg-bond0 DEVICE=bond0 USERCTL=no BOOTPROTO=none ONBOOT=yes IPADDR=10.0.0.10 NETMASK=255.255.0.0 NETWORK=10.0.0.0 TYPE=Unknown IPV6INIT=no ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no /etc/modprob.d/bonding.conf alias bond0 bonding options bond0 mode=5 miimon=100 Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. My goal is to get this working under bridging for KVM, I can only imagine the nightmare seeing I can't get a simple bond to work! Any guidance is golden. - aurf _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
