Hi, folks, Since I've gotten a total of one response in days on the HP forum, maybe the collective mind here has an answer.... As I've mentioned in other posts, we have an HP dl580 g5 that started throwing ECC errors. But wait, it's worse: memory is mirrored.... And the thing is fully populated with 32 DIMMs.
I took my best guess, pulled the matching set of DIMMs, and took two off of one of the four riser boards to replace them. I find that the m/b *must* be fully populated before adding riser boards... *and* the riser boards are mirrored. So I had to pull two riser boards, the one I'd taken two DIMMs off of, and it's mirror. Brought it back up, no errors. Then, Monday, I tried replacing one of the two, apparently good riser boards with one that I'd taken out, and had put the two DIMMs that I was guessing included the bad one. I *still* can't provoke the error. Maybe it only happens when I have everything fully populated? (I've run stress to the point where all 2G of swap is used....) Meanwhile, I'd joined an HP forum, and someone suggested that I really, really needed a BIOS update, and that would fix it. Sounds plausible. However, when I found the d/l of that, I ran into three things: first, the damn thing was an .exe, and they do *not* seem to have a .bin. Second, the "description" (laughable, at best) didn't seem to say anything about ECC errors, but whatever. Then there's the biggie: it *seems* to say that I have to install a previous BIOS update first... but I'm not sure. I would have thought it was a full package. Now, as the system is long out of warranty, and there's no way the other Institute will spring to pay HP, they won't even talk to me about *anything*, so I'm on my own. The upshot: does anyone here have a clue as to whether I can flash update the BIOS with the latest update, or whether I actually have to do the older one first? Thanks in advance. mark _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos