On 11/11/13, Arun Khan <knu...@gmail.com> wrote: > On Mon, Nov 11, 2013 at 3:14 PM, hadi motamedi <motamed...@gmail.com> > wrote: >> Dear All >> I needed to clone my disk to another hard drive . I did it as the >> following : >> #dd if=/dev/sdb of=/dev/sdc >> But after a while, the procedure ended with the "writing to /dev/sdc >> input/output error" message. > > Is /dev/sdc >= /dev/sdb? > > Also, input/output error is an indication of a hardware problem (disk > controller on the board, cable, or the disk). > >> Can you please let me know how can I overcome this as the fdisk now >> returns as " >> #fdisk /dev/sdc >> "I do not know how to handle files with mode 81a4 >> must set cylinders" > > What does 'parted --list' display? > >> What can I do at know ? > > Post the answers for above. > > -- Arun Khan > _______________________________________________ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos >
Please find below : #parted -list disk /dev/hda 21.5GB sector : 512B/512B partition : msdos disk : /dev/sdb 40GB sector : 512B/512B partition : msdos error: unable to open /dev/md0 unrecognized disk label. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
