On Wed, 4 Dec 2013, Steve Clark wrote: > Also did you check the Health Status in the BIOS, was the temperature in > spec with what the chip spec is. You can run cpuburn (program) and see if > running the processor full out causes it to shutdown.
Once upon a time, the CPU area temperature was 80 C, which got a "BING! BING! BING!" from m.roth. Also, the last time checked I noticed that 5v was 5.263, more than 3% error. On Tue, 3 Dec 2013, Thomas Dineen wrote: > It will be easier and cheaper to by a static grounding strap > that you wear on your wrist and connect to a conducting part > of the metal cabnet. My plan involved a wire-wrap wire "bracelet" and a megohm resistor. Connecting the other end to a bare metal part of the case is sufficient? I don't need an actual ground? -- Michael henne...@web.cs.ndsu.nodak.edu "SCSI is NOT magic. There are *fundamental technical reasons* why it is necessary to sacrifice a young goat to your SCSI chain now and then." -- John Woods _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos