> -----Original Message----- > From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On > Behalf Of Keith Keller > Sent: den 5 december 2013 16:57 > To: centos@centos.org > Subject: Re: [CentOS] Third-party SATA-RAID cards suggestions > > > So far I've tried a Highpoint RocketRAID 2740 and a LSI 9201-16i without > > too > > much success. > > The MegaRAID 9271 works OOTB with CentOS 6.4. Every 3ware card (also > from LSI) I've used also works OOTB with CentOS. If you are new to > hardware RAID, the 3ware interface is a lot easier to learn than the > MegaRAID's. (I suspect that other LSI cards, including the 9201, work > fine with CentOS too; perhaps you can post your error messages so we can > see what's wrong, instead of replacing a working controller.)
Okay, thanks. I see several of you guys say that the Megaraid as well as the LSI-card should work out of the box with CentOS. My understanding is that the necessary driver modules are already built into the kernel. Am I assuming this correctly that the card should therefore be seen at install with no tweaking? In any case, I sent the thing back to the dealer yesterday. Awaiting their testing results. -- //Sorin
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos