On 10/01/2012 10:41 AM, Bryan K. Wright wrote:
Hi again,
Hello!
I've fiddled around a lot with journal settings, so
to make sure I'm comparing apples to apples, I went back and
systematically re-ran the benchmark tests I've been running
(and some more). A long data dump follows, but the end result
is that it does look like something fishy is going on for small
file sizes. For example, performance difference between 4MB
and 4KB files in the rados write benchmark is a factor of 25 or
more. Here are the details, with a recap of the configuration
at the end.
Probably one of the most important things to think about when dealing
with small IOs on spinning disks is how well the operating system / file
system combine small writes into larger ones. With spinning disks you
get so few iops to work with that your throughput is almost entirely
governed by seek behavior. There are many possible reasons for slow
performance, but this should always be something you keep in mind during
your tests.
I started out by remaking the underlying xfs filesystems
on the OSD hosts, and then rerunning mkcephfs. The journals
are 120 GB SSDs.
First, the rsync tests again:
* Rsync of ~60 GB directory tree (mostly small files) from ceph client
to mounted cephfs goes at about 5.2 MB/s.
When you were doing this, what kind of results did collectl give you for
average write sizes to the underlying OSD disks?
* I then turned off ceph (service ceph -a stop) and did the same
rsync between the same two hosts, onto the same RAID array on
one of the OSD hosts, but using ssh this time. This time it
goes at about 37 MB/s.
This implies to me that the slowdown is somewhere in ceph, not in
the RAID array or the network connectivity.
There's multiple issues potentially here. Part of it might be how
writes are coalesced by XFS in each scenario. Part of it might also be
overhead due to XFS metadata reads/writes. You could probably get a
better idea of both of these by running blktrace during the tests and
making seekwatcher movies of the results. You not only can look at the
numbers of seeks, but also the kind (read/writes) and where on the disk
they are going. That, and some of the raw blktrace data can give you a
lot of information about what is going on and whether or not seeks are
related to metadata.
Beyond that, I do think you are correct in suspecting that there are
some Ceph limitations as well. Some things that may be interesting to try:
- 1 OSD per Disk
- Multiple OSDs on the RAID array.
- Increasing various thread counts
- Increasing various op and byte limits (such as
journal_max_write_entries and journal_max_write_bytes).
- EXT4 or BTRFS under the OSDs.
I then remade the xfs filessytems again, re-ran mkcephfs,
restarted ceph and did some rados benchmarks.
* rados bench -p pbench 900 write -t 256 -b 4096
Total time run: 900.184096
Total writes made: 1052511
Write size: 4096
Bandwidth (MB/sec): 4.567
Stddev Bandwidth: 4.34241
Max bandwidth (MB/sec): 23.1719
Min bandwidth (MB/sec): 0
Average Latency: 0.218949
Stddev Latency: 0.566181
Max latency: 9.92952
Min latency: 0.001449
XFS does pretty poorly with RADOS bench at small IO sizes from what I've
seen. EXT4 and BTRFS tend to do better, but probably not more than 2-3
times better.
* rados bench -p pbench 900 write -t 256 (default 4MB size)
Total time run: 900.816140
Total writes made: 25263
Write size: 4194304
Bandwidth (MB/sec): 112.178
Stddev Bandwidth: 27.1239
Max bandwidth (MB/sec): 840
Min bandwidth (MB/sec): 0
Average Latency: 9.08281
Stddev Latency: 0.505372
Max latency: 9.31865
Min latency: 0.818949
I imagine your Max throughput for 4MB IOs is being limited by the
network here. You may be able to get higher aggregate performance by
running rados bench on multiple clients concurrently.
I repeated each of these benchmarks three times, but saw
similar results each time (a factor of 25 or more in speed between
small and large object sizes).
Next, I stopped ceph and took a look at local RAID
performance as a function of file size using "iozone":
http://ayesha.phys.virginia.edu/~bryan/iozone-write-local-raid.pdf
Then I re-made the ceph filesystem and restarted ceph, and used
iozone on the ceph client to look at the mounted ceph filesystem:
http://ayesha.phys.virginia.edu/~bryan/iozone-write-cephfs.pdf
Do you happen to have the settings you used when you ran these tests? I
probably don't have time to try to repeat them now, but I can at least
take a quick look at them.
I'm not sure how to interpret the iozone performance numbers,
but the distribution certainly looks much less uniform across
different file and chunk sizes for the mounted ceph filesystem.
Indeed. Some of that is to be expected just because of the increased
complexity and number of ways that things can get backed up in a
distributed system like Ceph. Having said that, the trench in the
middle of the Ceph distribution is interesting. I wouldn't mind digging
into that more.
I'm slightly confused by the labels on the graph. They can't possibly
mean that 2^16384 KB record sizes were tested. Was that just up to 16MB
records and 16GB files? That would make a lot more sense.
Finally, I took a look at the results of bonnie++
benchmarks for I/O directly to the RAID array, or to the
mounted ceph filesystem.
* Looking at RAID array from one of the OSD hosts:
Version 1.96 ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
RAID on OSD 23800M 1155 99 318264 26 132959 19 2884 99 293464 20 535.4
23
Latency 7354us 30955us 129ms 8220us 119ms 62188us
Version 1.96 ------Sequential Create------ --------Random Create--------
RAID on OSD -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 17680 58 +++++ +++ 26994 78 24715 81 +++++ +++ 26597 78
Latency 113us 105us 153us 109us 15us 94us
* Looking at the mounted ceph filesystem from the ceph client:
Version 1.96 ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
cephfs, client 16G 1101 95 114623 8 45713 2 2665 98 133537 3 882.0
14
Latency 44515us 37018us 6437ms 12747us 469ms 60004us
Version 1.96 ------Sequential Create------ --------Random Create--------
cephfs, client -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 653 3 19886 9 601 3 746 3 +++++ +++ 585 2
Latency 1171ms 7467us 174ms 104ms 19us 228ms
This seems to show about a factor of 3 difference in speed between
writing to the mounted ceph filesystem and writing directly to the RAID
array.
This might be a dumb question, but was the ceph version of this test on
a single client on gigabit Ethernet? If so, wouldn't that be the reason
you are maxing out at like 114MB/s?
While I was doing these, I kept an eye on the OSDs and MDSs
with collectl and atop, but I didn't see anything that looked
like an obvious problem. The MDSs didn't see very high CPU, I/O
or memory usage, for example.
Finally, to recap the configuration:
3 MDS hosts
4 OSD hosts, each with a RAID array for object storage and an SSD journal
xfs filesystems for the object stores
gigabit network on the front end, and a separate back end gigabit network for
the ceph hosts.
64-bit CentOS 6.3 and ceph 0.48.2 everywhere
ceph servers running stock CentOS 2.6.32-279.9.1 kernel.
client running "elrepo" 3.5.4-1 kernel.
Bryan
Mark
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html