On Wed, Oct 31, 2012 at 1:07 AM, Josh Durgin <josh.dur...@inktank.com> wrote: > On 10/28/2012 03:02 AM, Andrey Korolyov wrote: >> >> Hi, >> >> Should following behavior considered to be normal? >> >> $ rbd map test-rack0/debiantest --user qemukvm --secret qemukvm.key >> $ fdisk /dev/rbd1 >> >> Command (m for help): p >> >> Disk /dev/rbd1: 671 MB, 671088640 bytes >> 255 heads, 63 sectors/track, 81 cylinders, total 1310720 sectors >> Units = sectors of 1 * 512 = 512 bytes >> Sector size (logical/physical): 512 bytes / 512 bytes >> I/O size (minimum/optimal): 4194304 bytes / 4194304 bytes >> Disk identifier: 0x00056f14 >> >> Device Boot Start End Blocks Id System >> /dev/rbd1p1 2048 63487 30720 82 Linux swap / >> Solaris >> Partition 1 does not start on physical sector boundary. >> /dev/rbd1p2 63488 1292287 614400 83 Linux >> Partition 2 does not start on physical sector boundary. >> >> Meanwhile, in the guest vm over same image: >> >> fdisk /dev/vda >> >> Command (m for help): p >> >> Disk /dev/vda: 671 MB, 671088640 bytes >> 16 heads, 63 sectors/track, 1300 cylinders, total 1310720 sectors > > > I'm guessing the reported number of cylinders is the issue? > You can control that with a qemu option. I think > > -drive ...cyls=81 > > will do it. You can also set the min/opt i/o sizes via > qemu device properties min_io_size and opt_io_size in > the same way you can adjust discard granularity: > > http://ceph.com/docs/master/rbd/qemu-rbd/#enabling-discard-trim > > Unfortunately min_io_size is a uint16 in qemu, so it won't > be able to store 4194304. > > >> Units = sectors of 1 * 512 = 512 bytes >> Sector size (logical/physical): 512 bytes / 512 bytes >> I/O size (minimum/optimal): 512 bytes / 512 bytes >> Disk identifier: 0x00056f14 >> >> Device Boot Start End Blocks Id System >> /dev/vda1 2048 63487 30720 82 Linux swap / >> Solaris >> /dev/vda2 63488 1292287 614400 83 Linux >> >> The real pain starts when I try to repartition disk from after 'rbd >> map' using its geometry - it simply broke partition layout, for >> example, first block offset moves from 2048b to 8192. Of course I can >> specify geometry by hand, but before that I may need to start vm at >> least once or do something else which will print me out actual layout. >> >> Thanks! > > > Setting the geometry at qemu boot time should work, and is a bit easier. > qemu actually has code to try to guess disk geometry from a partition > table, but perhaps it doesn't support the format you're using. > > Josh
So preferable geometry is one provided by kernel client, right? Is there any advantages of using large blocks for I/O with discard(ofc, not right now, I`ll wait for virtio bus support :) )? At first sight, TCP transfers should not differ by resulting speed on typical workloads, but only on exotic ones - like delayed commit on the guest FS + intensive writes. -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html