Sam/Josh,
We upgraded from 0.61.7 to 0.67.1 during a maintenance window this
morning, hoping it would improve this situation, but there was no
appreciable change.
One node in our cluster fsck'ed after a reboot and got a bit behind. Our
instances backed by RBD volumes were OK at that point, but once the node
booted fully and the OSDs started, all Windows instances with rbd
volumes experienced very choppy performance and were unable to ingest
video surveillance traffic and commit it to disk. Once the cluster got
back to HEALTH_OK, they resumed normal operation.
I tried for a time with conservative recovery settings (osd max
backfills = 1, osd recovery op priority = 1, and osd recovery max active
= 1). No improvement for the guests. So I went to more aggressive
settings to get things moving faster. That decreased the duration of the
outage.
During the entire period of recovery/backfill, the network looked
fine...no where close to saturation. iowait on all drives look fine as well.
Any ideas?
Thanks,
Mike Dawson
On 8/14/2013 3:04 AM, Stefan Priebe - Profihost AG wrote:
the same problem still occours. Will need to check when i've time to
gather logs again.
Am 14.08.2013 01:11, schrieb Samuel Just:
I'm not sure, but your logs did show that you had >16 recovery ops in
flight, so it's worth a try. If it doesn't help, you should collect
the same set of logs I'll look again. Also, there are a few other
patches between 61.7 and current cuttlefish which may help.
-Sam
On Tue, Aug 13, 2013 at 2:03 PM, Stefan Priebe - Profihost AG
<s.pri...@profihost.ag> wrote:
Am 13.08.2013 um 22:43 schrieb Samuel Just <sam.j...@inktank.com>:
I just backported a couple of patches from next to fix a bug where we
weren't respecting the osd_recovery_max_active config in some cases
(1ea6b56170fc9e223e7c30635db02fa2ad8f4b4e). You can either try the
current cuttlefish branch or wait for a 61.8 release.
Thanks! Are you sure that this is the issue? I don't believe that but i'll give
it a try. I already tested a branch from sage where he fixed a race regarding
max active some weeks ago. So active recovering was max 1 but the issue didn't
went away.
Stefan
-Sam
On Mon, Aug 12, 2013 at 10:34 PM, Samuel Just <sam.j...@inktank.com> wrote:
I got swamped today. I should be able to look tomorrow. Sorry!
-Sam
On Mon, Aug 12, 2013 at 9:39 PM, Stefan Priebe - Profihost AG
<s.pri...@profihost.ag> wrote:
Did you take a look?
Stefan
Am 11.08.2013 um 05:50 schrieb Samuel Just <sam.j...@inktank.com>:
Great! I'll take a look on Monday.
-Sam
On Sat, Aug 10, 2013 at 12:08 PM, Stefan Priebe <s.pri...@profihost.ag> wrote:
Hi Samual,
Am 09.08.2013 23:44, schrieb Samuel Just:
I think Stefan's problem is probably distinct from Mike's.
Stefan: Can you reproduce the problem with
debug osd = 20
debug filestore = 20
debug ms = 1
debug optracker = 20
on a few osds (including the restarted osd), and upload those osd logs
along with the ceph.log from before killing the osd until after the
cluster becomes clean again?
done - you'll find the logs at cephdrop folder:
slow_requests_recovering_cuttlefish
osd.52 was the one recovering
Thanks!
Greets,
Stefan
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
