Hi mark , There are four tables in your report , do you run four tests cases or only run a single case (read/write mix) , if you run a single mix case , but latency in the fourth table is not same with other three tables .
In leveldb and rocksdb, level0 and level1 should be same size? to my knowledge , in rocksdb , by default ,level1 size is ten times of level0 size , but the same size sstable file. -----Original Message----- From: ceph-devel-ow...@vger.kernel.org [mailto:ceph-devel-ow...@vger.kernel.org] On Behalf Of Mark Nelson Sent: Tuesday, July 29, 2014 12:56 AM To: Shu, Xinxin; ceph-devel@vger.kernel.org Subject: Re: First attempt at rocksdb monitor store stress testing Hi Xinxin, Thanks, I'll give it a try. I want to figure out what's going on in Rocksdb when the test stalls with leveled compaction. In the mean time, here are the test results with spinning disks and SSDs: http://nhm.ceph.com/mon-store-stress/Monitor_Store_Stress_Short_Tests.pdf Mark On 07/27/2014 11:45 PM, Shu, Xinxin wrote: > Hi mark, > > I tested this option on my setup , same issue happened , I will dig into it , > if you want to get info log , there is a workaround, set this option to none: > > Rocksdb_log = "" > > Cheers, > xinxin > > -----Original Message----- > From: Mark Nelson [mailto:mark.nel...@inktank.com] > Sent: Saturday, July 26, 2014 12:10 AM > To: Shu, Xinxin; ceph-devel@vger.kernel.org > Subject: Re: First attempt at rocksdb monitor store stress testing > > Hi Xinxin, > > I'm trying to enable the rocksdb log file as described in config_opts using: > > rocksdb_log = <path to log file> > > The file gets created but is empty. Any ideas? > > Mark > > On 07/24/2014 08:28 PM, Shu, Xinxin wrote: >> Hi mark, >> >> I am looking forward to your results on SSDs . >> rocksdb generates a crc of data to be written , this cannot be switch off >> (but can be subsititued with xxhash), there are two options , Option. >> verify_checksums_in_compaction and ReadOptions. verify_checksums, If we >> disable these two options , i think cpu usage will goes down . If we use >> universal compaction , this is not friendly with read operation. >> >> Btw , can you list your rocksdb configuration? >> >> Cheers, >> xinxin >> >> -----Original Message----- >> From: Mark Nelson [mailto:mark.nel...@inktank.com] >> Sent: Friday, July 25, 2014 7:45 AM >> To: Shu, Xinxin; ceph-devel@vger.kernel.org >> Subject: Re: First attempt at rocksdb monitor store stress testing >> >> Earlier today I modified the rocksdb options so I could enable universal >> compaction. Over all performance is lower but I don't see the hang/stall in >> the middle of the test either. Instead the disk is basically pegged with >> 100% writes. I suspect average latency is higher than leveldb, but the >> highest latency is about 5-6s while we were seeing 30s spikes for leveldb >> with levelled (heh) compaction. >> >> I haven't done much tuning either way yet. It may be that if we keep level >> 0 and level 1 roughly the same size we can reduce stalls in the levelled >> setups. It will also be interesting to see what happens in these tests on >> SSDs. >> >> Mark >> >> On 07/24/2014 06:13 AM, Mark Nelson wrote: >>> Hi Xinxin, >>> >>> Thanks! I wonder as well if it might be interesting to expose the >>> options related to universal compaction? It looks like rocksdb >>> provides a lot of interesting knobs you can adjust! >>> >>> Mark >>> >>> On 07/24/2014 12:08 AM, Shu, Xinxin wrote: >>>> Hi mark, >>>> >>>> I think this maybe related to 'verify_checksums' config option >>>> ,when ReadOptions is initialized, default this option is true , >>>> all data read from underlying storage will be verified against >>>> corresponding checksums, however, this option cannot be >>>> configured in wip-rocksdb branch. I will modify code to make this option >>>> configurable . >>>> >>>> Cheers, >>>> xinxin >>>> >>>> -----Original Message----- >>>> From: ceph-devel-ow...@vger.kernel.org >>>> [mailto:ceph-devel-ow...@vger.kernel.org] On Behalf Of Mark Nelson >>>> Sent: Thursday, July 24, 2014 7:14 AM >>>> To: ceph-devel@vger.kernel.org >>>> Subject: First attempt at rocksdb monitor store stress testing >>>> >>>> Hi Guys, >>>> >>>> So I've been interested lately in leveldb 99th percentile latency >>>> (and the amount of write amplification we are seeing) with leveldb. >>>> Joao mentioned he has written a tool called mon-store-stress in >>>> wip-leveldb-misc to try to provide a means to roughly guess at >>>> what's happening on the mons under heavy load. I cherry-picked it >>>> over to wip-rocksdb and after a couple of hacks was able to get >>>> everything built and running with some basic tests. There was >>>> little tuning done and I don't know how realistic this workload is, >>>> so don't assume this means anything yet, but some initial results are here: >>>> >>>> http://nhm.ceph.com/mon-store-stress/First%20Attempt.pdf >>>> >>>> Command that was used to run the tests: >>>> >>>> ./ceph-test-mon-store-stress --mon-keyvaluedb <leveldb|rocksdb> >>>> --write-min-size 50K --write-max-size 2M --percent-write 70 >>>> --percent-read 30 --keep-state --test-seed 1406137270 --stop-at >>>> 5000 foo >>>> >>>> The most interesting bit right now is that rocksdb seems to be >>>> hanging in the middle of the test (left it running for several >>>> hours). CPU usage on one core was quite high during the hang. >>>> Profiling using perf with dwarf symbols I see: >>>> >>>> - 49.14% ceph-test-mon-s ceph-test-mon-store-stress [.] >>>> unsigned int >>>> rocksdb::crc32c::ExtendImpl<&rocksdb::crc32c::Fast_CRC32>(unsigned >>>> int, char const*, unsigned long) >>>> - unsigned int >>>> rocksdb::crc32c::ExtendImpl<&rocksdb::crc32c::Fast_CRC32>(unsigned >>>> int, char const*, unsigned long) >>>> 51.70% >>>> rocksdb::ReadBlockContents(rocksdb::RandomAccessFile*, >>>> rocksdb::Footer const&, rocksdb::ReadOptions const&, >>>> rocksdb::BlockHandle const&, rocksdb::BlockContents*, >>>> rocksdb::Env*, >>>> bool) >>>> 48.30% >>>> rocksdb::BlockBasedTableBuilder::WriteRawBlock(rocksdb::Slice >>>> const&, rocksdb::CompressionType, rocksdb::BlockHandle*) >>>> >>>> Not sure what's going on yet, may need to try to enable >>>> logging/debugging in rocksdb. Thoughts/Suggestions welcome. :) >>>> >>>> Mark >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe ceph-devel" >>>> in the body of a message to majord...@vger.kernel.org More >>>> majordomo info at http://vger.kernel.org/majordomo-info.html >>>> >>> >> > -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
