Dear Michael, maybe there is a way to restore access for users and solve the issues later. Someone else with a lost/unfound object was able to move the affected file (or directory containing the file) to a separate location and restore the now missing data from backup. This will "park" the problem of cluster health for later fixing.
Best regads, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Frank Schilder <fr...@dtu.dk> Sent: 18 September 2020 15:38:51 To: Michael Thomas; ceph-users@ceph.io Subject: [ceph-users] Re: multiple OSD crash, unfound objects Dear Michael, > I disagree with the statement that trying to recover health by deleting > data is a contradiction. In some cases (such as mine), the data in ceph > is backed up in another location (eg tape library). Restoring a few > files from tape is a simple and cheap operation that takes a minute, at > most. I would agree with that if the data was deleted using the appropriate high-level operation. Deleting an unfound object is like marking a sector on a disk as bad with smartctl. How should the file system react to that? Purging an OSD is like removing a disk from a raid set. Such operations increase inconsistencies/degradation rather than resolving them. Cleaning this up also requires to execute other operations to remove all references to the object and, finally, the file inode itself. The ls on a dir with corrupted file(s) hangs if ls calls stat on every file. For example, when coloring is enabled, ls will stat every file in the dir to be able to choose the color according to permissions. If one then disables coloring, a plain "ls" will return all names while an "ls -l" will hang due to stat calls. An "rm" or "rm -f" should succeed if the folder permissions allow that. It should not stat the file itself, so it sounds a bit odd that its hanging. I guess in some situations it does, like "rm -i", which will ask before removing read-only files. How does "unlink FILE" behave? Most admin commands on ceph are asynchronous. A command like "pg repair" or "osd scrub" only schedules an operation. The command "ceph pg 7.1fb mark_unfound_lost delete" does probably just the same. Unfortunately, I don't know how to check that a scheduled operation has started/completed/succeeded/failed. I asked this in an earlier thread (about PG repair) and didn't get an answer. On our cluster, the actual repair happened ca. 6-12 hours after scheduling (on a healthy cluster!). I would conclude that (some of) these operations have very low priority and will not start at least as long as there is recovery going on. One might want to consider the possibility that some of the scheduled commands have not been executed yet. The output of "pg query" contains the IDs of the missing objects (in mimic) and each of these objects is on one of the peer OSDs of the PG (I think object here refers to shard or copy). It should be possible to find the corresponding OSD (or at least obtain confirmation that the object is really gone) and move the object to a place where it is expected to be found. This can probably be achieved with "PG export" and "PG import". I don't know of any other way(s). I guess, in the current situation, sitting it out a bit longer might be a good strategy. I don't know how many asynchronous commands you executed and giving the cluster time to complete these jobs might improve the situation. Sorry that I can't be of more help here. However, if you figure out a solution (ideally non-destructive), please post it here. Best regards, ================= Frank Schilder AIT Risø Campus Bygning 109, rum S14 ________________________________________ From: Michael Thomas <w...@caltech.edu> Sent: 18 September 2020 14:15:53 To: Frank Schilder; ceph-users@ceph.io Subject: Re: [ceph-users] multiple OSD crash, unfound objects Hi Frank, On 9/18/20 2:50 AM, Frank Schilder wrote: > Dear Michael, > > firstly, I'm a bit confused why you started deleting data. The objects were > unfound, but still there. That's a small issue. Now the data might be gone > and that's a real issue. > > ---------------------------- > Interval: > > Anyone reading this: I have seen many threads where ceph admins started > deleting objects or PGs or even purging OSDs way too early from a cluster. > Trying to recover health by deleting data is a contradiction. Ceph has bugs > and sometimes it needs some help finding everything again. As far as I know, > for most of these bugs there are workarounds that allow full recovery with a > bit of work. I disagree with the statement that trying to recover health by deleting data is a contradiction. In some cases (such as mine), the data in ceph is backed up in another location (eg tape library). Restoring a few files from tape is a simple and cheap operation that takes a minute, at most. For the sake of expediency, sometimes it's quicker and easier to simply delete the affected files and restore them from the backup system. This procedure has worked fine with our previous distributed filesystem (hdfs), so I (naively?) thought that it could be used with ceph as well. I was a bit surprised that cephs behavior was to indefinitely block the 'rm' operation so that the affected file could not even be removed. Since I have 25 unfound objects spread across 9 PGs, I used a PG with a single unfound object to test this alternate recovery procedure. > First question is, did you delete the entire object or just a shard on one > disk? Are there OSDs that might still have a copy? Per the troubleshooting guide (https://docs.ceph.com/en/latest/rados/troubleshooting/troubleshooting-pg/), I ran: ceph pg 7.1fb mark_unfound_lost delete So I presume that the entire object has been deleted. > If the object is gone for good, the file references something that doesn't > exist - its like a bad sector. You probably need to delete the file. Bit > strange that the operation does not err out with a read error. Maybe it > doesn't because it waits for the unfound objects state to be resolved? Even before the object was removed, all read operations on the file would hang. Even worse, attempts to stat() the file with commands such as 'ls' or 'rm' would hang. Even worse, attempts to 'ls' in the directory itself would hang. This hasn't changed after removing the object. *Update*: The stat() operations may not be hanging indefinitely. It seems to hang for somewhere between 10 minutes and 8 hours. > For all the other unfound objects, they are there somewhere - you didn't > loose a disk or something. Try pushing ceph to scan the correct OSDs, for > example, by restarting the newly added OSDs one by one or something similar. > Sometimes exporting and importing a PG from one OSD to another forces a > re-scan and subsequent discovery of unfound objects. It is also possible that > ceph will find these objects along the way of recovery or when OSDs scrub or > check for objects that can be deleted. I have restarted the new OSDs countless times. I've used three different methods to restart the OSD: * systemctl restart ceph-osd@120 * init 6 * ceph osd out 120 ...wait for repeering to finish... systemctl restart ceph-osd@120 ceph osd in 120 I've done this for all OSDs that a PG has listed in the 'not queried' state in 'ceph pg $pgid detail'. But even when all OSDs in the PG are back to the 'already probed' state, the missing objects remain. Over 90% of my PGs have not been deep scrubbed recently, due to the amount of backfilling and importing of data into the ceph cluster. I plan to leave the cluster mostly idle over the weekend so that hopefully the deep scrubs can catch up and possibly locate any missing objects. --Mike > Best regards, > ================= > Frank Schilder > AIT Risø Campus > Bygning 109, rum S14 > > ________________________________________ > From: Michael Thomas <w...@caltech.edu> > Sent: 17 September 2020 22:27:47 > To: Frank Schilder; ceph-users@ceph.io > Subject: Re: [ceph-users] multiple OSD crash, unfound objects > > Hi Frank, > > Yes, it does sounds similar to your ticket. > > I've tried a few things to restore the failed files: > > * Locate a missing object with 'ceph pg $pgid list_unfound' > > * Convert the hex oid to a decimal inode number > > * Identify the affected file with 'find /ceph -inum $inode' > > At this point, I know which file is affected by the missing object. As > expected, attempts to read the file simply hang. Unexpectedly, attempts > to 'ls' the file or its containing directory also hang. I presume from > this that the stat() system call needs some information that is > contained in the missing object, and is waiting for the object to become > available. > > Next I tried to remove the affected object with: > > * ceph pg $pgid mark_unfound_lost delete > > Now 'ceph status' shows one fewer missing objects, but attempts to 'ls' > or 'rm' the affected file continue to hang. > > Finally, I ran a scrub over the part of the filesystem containing the > affected file: > > ceph tell mds.ceph4 scrub start /frames/postO3/hoft recursive > > Nothing seemed to come up during the scrub: > > 2020-09-17T14:56:15.208-0500 7f39bca24700 1 mds.ceph4 asok_command: > scrub status {prefix=scrub status} (starting...) > 2020-09-17T14:58:58.013-0500 7f39bca24700 1 mds.ceph4 asok_command: > scrub start {path=/frames/postO3/hoft,prefix=scrub > start,scrubops=[recursive]} (starting...) > 2020-09-17T14:58:58.013-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub summary: active > 2020-09-17T14:58:58.014-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub queued for path: /frames/postO3/hoft > 2020-09-17T14:58:58.014-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub summary: active [paths:/frames/postO3/hoft] > 2020-09-17T14:59:02.535-0500 7f39bca24700 1 mds.ceph4 asok_command: > scrub status {prefix=scrub status} (starting...) > 2020-09-17T15:00:12.520-0500 7f39bca24700 1 mds.ceph4 asok_command: > scrub status {prefix=scrub status} (starting...) > 2020-09-17T15:02:32.944-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub summary: idle > 2020-09-17T15:02:32.945-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub complete with tag '1405e5c7-3ecf-4754-918e-129e9d101f7a' > 2020-09-17T15:02:32.945-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub completed for path: /frames/postO3/hoft > 2020-09-17T15:02:32.945-0500 7f39b5215700 0 log_channel(cluster) log > [INF] : scrub summary: idle > > > After the scrub completed, access to the file (ls or rm) continue to > hang. The MDS reports slow reads: > > 2020-09-17T15:11:05.654-0500 7f39b9a1e700 0 log_channel(cluster) log > [WRN] : slow request 481.867381 seconds old, received at > 2020-09-17T15:03:03.788058-0500: client_request(client.451432:11309 > getattr pAsLsXsFs #0x1000005b1c0 2020-09-17T15:03:03.787602-0500 > caller_uid=0, caller_gid=0{}) currently dispatched > > Does anyone have any suggestions on how else to clean up from a > permanently lost object? > > --Mike > > On 9/16/20 2:03 AM, Frank Schilder wrote: >> Sounds similar to this one: https://tracker.ceph.com/issues/46847 >> >> If you have or can reconstruct the crush map from before adding the OSDs, >> you might be able to discover everything with the temporary reversal of the >> crush map method. >> >> Not sure if there is another method, i never got a reply to my question in >> the tracker. >> >> Best regards, >> ================= >> Frank Schilder >> AIT Risø Campus >> Bygning 109, rum S14 >> >> ________________________________________ >> From: Michael Thomas <w...@caltech.edu> >> Sent: 16 September 2020 01:27:19 >> To: ceph-users@ceph.io >> Subject: [ceph-users] multiple OSD crash, unfound objects >> >> Over the weekend I had multiple OSD servers in my Octopus cluster >> (15.2.4) crash and reboot at nearly the same time. The OSDs are part of >> an erasure coded pool. At the time the cluster had been busy with a >> long-running (~week) remapping of a large number of PGs after I >> incrementally added more OSDs to the cluster. After bringing all of the >> OSDs back up, I have 25 unfound objects and 75 degraded objects. There >> are other problems reported, but I'm primarily concerned with these >> unfound/degraded objects. >> >> The pool with the missing objects is a cephfs pool. The files stored in >> the pool are backed up on tape, so I can easily restore individual files >> as needed (though I would not want to restore the entire filesystem). >> >> I tried following the guide at >> https://docs.ceph.com/docs/octopus/rados/troubleshooting/troubleshooting-pg/#unfound-objects. >> I found a number of OSDs that are still 'not queried'. Restarting a >> sampling of these OSDs changed the state from 'not queried' to 'already >> probed', but that did not recover any of the unfound or degraded objects. >> >> I have also tried 'ceph pg deep-scrub' on the affected PGs, but never >> saw them get scrubbed. I also tried doing a 'ceph pg force-recovery' on >> the affected PGs, but only one seems to have been tagged accordingly >> (see ceph -s output below). >> >> The guide also says "Sometimes it simply takes some time for the cluster >> to query possible locations." I'm not sure how long "some time" might >> take, but it hasn't changed after several hours. >> >> My questions are: >> >> * Is there a way to force the cluster to query the possible locations >> sooner? >> >> * Is it possible to identify the files in cephfs that are affected, so >> that I could delete only the affected files and restore them from backup >> tapes? >> >> --Mike >> >> ceph -s: >> >> cluster: >> id: 066f558c-6789-4a93-aaf1-5af1ba01a3ad >> health: HEALTH_ERR >> 1 clients failing to respond to capability release >> 1 MDSs report slow requests >> 25/78520351 objects unfound (0.000%) >> 2 nearfull osd(s) >> Reduced data availability: 1 pg inactive >> Possible data damage: 9 pgs recovery_unfound >> Degraded data redundancy: 75/626645098 objects degraded >> (0.000%), 9 pgs degraded >> 1013 pgs not deep-scrubbed in time >> 1013 pgs not scrubbed in time >> 2 pool(s) nearfull >> 1 daemons have recently crashed >> 4 slow ops, oldest one blocked for 77939 sec, daemons >> [osd.0,osd.41] have slow ops. >> >> services: >> mon: 4 daemons, quorum ceph1,ceph2,ceph3,ceph4 (age 9d) >> mgr: ceph3(active, since 11d), standbys: ceph2, ceph4, ceph1 >> mds: archive:1 {0=ceph4=up:active} 3 up:standby >> osd: 121 osds: 121 up (since 6m), 121 in (since 101m); 4 remapped pgs >> >> task status: >> scrub status: >> mds.ceph4: idle >> >> data: >> pools: 9 pools, 2433 pgs >> objects: 78.52M objects, 298 TiB >> usage: 412 TiB used, 545 TiB / 956 TiB avail >> pgs: 0.041% pgs unknown >> 75/626645098 objects degraded (0.000%) >> 135224/626645098 objects misplaced (0.022%) >> 25/78520351 objects unfound (0.000%) >> 2421 active+clean >> 5 active+recovery_unfound+degraded >> 3 active+recovery_unfound+degraded+remapped >> 2 active+clean+scrubbing+deep >> 1 unknown >> 1 active+forced_recovery+recovery_unfound+degraded >> >> progress: >> PG autoscaler decreasing pool 7 PGs from 1024 to 512 (5d) >> [............................] >> _______________________________________________ >> ceph-users mailing list -- ceph-users@ceph.io >> To unsubscribe send an email to ceph-users-le...@ceph.io >> > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
