Hi Eugen, The issue looks fixed now in my kernel client mount works fine without cluster IP.
I have re-run "ceph config set osd cluster_network 10.100.4.0/24" and restarted all service. Eearlier it was run with "ceph config set global cluster_network 10.100.4.0/24". I have run the command output you have asked and output is after applying all the changes above said. # ceph config get mon cluster_network ouput : #ceph config get mon public_network output : 10.100.3.0/24 Still testing more on this to confirm the issue and playing out with my ceph cluster. regards Amudhan P On Wed, Nov 11, 2020 at 2:14 PM Eugen Block <ebl...@nde.ag> wrote: > > Do you find any issue in the below commands I have used to set cluster IP > > in cluster. > > Yes I do: > > > ### adding public IP for ceph cluster ### > > ceph config set global cluster_network 10.100.4.0/24 > > I'm still not convinced that your setup is as you want it to be. > Can you share your actual config? > > ceph config get mon cluster_network > ceph config get mon public_network > > > > Zitat von Amudhan P <amudha...@gmail.com>: > > > Hi Eugen, > > > > I have only added my Public IP and relevant hostname to hosts file. > > > > Do you find any issue in the below commands I have used to set cluster IP > > in cluster. > > > > ### adding public IP for ceph cluster ### > > ceph config set global cluster_network 10.100.4.0/24 > > > > ceph orch daemon reconfig mon.host1 > > ceph orch daemon reconfig mon.host2 > > ceph orch daemon reconfig mon.host3 > > ceph orch daemon reconfig osd.1 > > ceph orch daemon reconfig osd.2 > > ceph orch daemon reconfig osd.3 > > > > restarting all daemons. > > > > regards > > Amudhan > > > > On Tue, Nov 10, 2020 at 7:42 PM Eugen Block <ebl...@nde.ag> wrote: > > > >> Could it be possible that you have some misconfiguration in the name > >> resolution and IP mapping? I've never heard or experienced that a > >> client requires a cluster address, that would make the whole concept > >> of separate networks obsolete which is hard to believe, to be honest. > >> I would recommend to double-check your setup. > >> > >> > >> Zitat von Amudhan P <amudha...@gmail.com>: > >> > >> > Hi Nathan, > >> > > >> > Kernel client should be using only the public IP of the cluster to > >> > communicate with OSD's. > >> > > >> > But here it requires both IP's for mount to work properly. > >> > > >> > regards > >> > Amudhan > >> > > >> > > >> > > >> > On Mon, Nov 9, 2020 at 9:51 PM Nathan Fish <lordci...@gmail.com> > wrote: > >> > > >> >> It sounds like your client is able to reach the mon but not the OSD? > >> >> It needs to be able to reach all mons and all OSDs. > >> >> > >> >> On Sun, Nov 8, 2020 at 4:29 AM Amudhan P <amudha...@gmail.com> > wrote: > >> >> > > >> >> > Hi, > >> >> > > >> >> > I have mounted my cephfs (ceph octopus) thru kernel client in > Debian. > >> >> > I get following error in "dmesg" when I try to read any file from > my > >> >> mount. > >> >> > "[ 236.429897] libceph: osd1 10.100.4.1:6891 socket closed (con > >> state > >> >> > CONNECTING)" > >> >> > > >> >> > I use public IP (10.100.3.1) and cluster IP (10.100.4.1) in my ceph > >> >> > cluster. I think public IP is enough to mount the share and work > on it > >> >> but > >> >> > in my case, it needs me to assign public IP also to the client to > work > >> >> > properly. > >> >> > > >> >> > Does anyone have experience in this? > >> >> > > >> >> > I have earlier also mailed the ceph-user group but I didn't get any > >> >> > response. So sending again not sure my mail went through. > >> >> > > >> >> > regards > >> >> > Amudhan > >> >> > _______________________________________________ > >> >> > ceph-users mailing list -- ceph-users@ceph.io > >> >> > To unsubscribe send an email to ceph-users-le...@ceph.io > >> >> > >> > _______________________________________________ > >> > ceph-users mailing list -- ceph-users@ceph.io > >> > To unsubscribe send an email to ceph-users-le...@ceph.io > >> > >> > >> _______________________________________________ > >> ceph-users mailing list -- ceph-users@ceph.io > >> To unsubscribe send an email to ceph-users-le...@ceph.io > >> > > > > _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io