Hi Everyone, I think this might be a bug so I'm wondering if anyone else has seen this. The issue is that config db filters for host don't seem to work. I was able to reproduce this on both prod and dev clusters that I tried it on with Nautilus 14.2.22.
The osd I'm testing (osd.0) is under this tree: -8 20.32744 datacenter dc01 -3 20.32744 rack dc01-rack01 -17 8.16148 chassis chassis01 -2 4.07590 host cstor01 0 hdd 1.00000 osd.0 up 1.00000 1.00000 I'm testing by changing the osd_max_backfills setting but it was the same with others I tried too. Here's an example setting with filter host then with filter chassis, but it worked for rack too. user@cstor01 DEV:~$ sudo ceph config set osd/host:cstor01 osd_max_backfills 2 user@cstor01 DEV:~$ sudo ceph config get osd.0 osd_max_backfills 2 user@cstor01 DEV:~$ sudo ceph config show osd.0 | grep osd_max_backfills osd_max_backfills 1 mon user@cstor01 DEV:~$ sudo ceph config rm osd/host:cstor01 osd_max_backfills user@cstor01 DEV:~$ sudo ceph config set osd/chassis:chassis01 osd_max_backfills 2 user@cstor01 DEV:~$ sudo ceph config show osd.0 | grep osd_max_backfills osd_max_backfills 2 mon As you can see, the max backfills stays at 1 in the daemon when using host filter but changes correctly to 2 when using the chassis filter. Is this a bug? I did a search but couldn't locate anything that sounded like this issue. Are others able to reproduce? Thanks, Rich _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
