Hi all, I have one active+clean+remapped PG on a 152 OSD Octopus (15.2.15) cluster with equal balanced OSD's (around 40% usage). The cluster has three replicas spreaded around three datacenters (A+B+C).
All PGs are available in each datacenter (as defined in the crush map), but only this one (which is in a pool containing 2048 PGs) is up on OSD.34 and OSD.42 and acting on OSD.34, OSD.42 and OSD.38. OSD.34 is located in datacenter A, 42 in B and 38 in A again, but it should be in C. I did restart all OSD's, monitors, managers and servers. I did out the OSDs that the PG is acting on and bring it back in a minute later. In all cases the PG holds the same state after backfilling, but one of the A replicas switches to another OSD in the A datacenter. I did turn off and on the balancer. But nothing seems to recover the PG to active+clean. Any suggestions? Regards, Erwin _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
