Hi,
As you suggested, it was the network that was wrong. It was set to
192.168.119.1/24
and when I changed it to ...119.0/24 the error went away. Even
introduced the error again and the error-messages reappeared.
But it is strange that I have had this error for weeks without any
errormessage ...
Thank you for your help!
/Johan
Den 2022-11-07 kl. 09:09, skrev Eugen Block:
Hi,
how does your mon section of the myservice.yaml look? Could you please
paste it?
How did you configure the public network? Can you share
# ceph config get mon public_network
It sounds like you have 192.168.119.1/24 but you wanted 192.168.119.0/24
configured (no host bits set), can you verify?
Regards,
Eugen
Zitat von Johan <jo...@oxyl.net>:
Im quite new to ceph and is changing a lot in my teststorage (Debian
11, 4 hosts in total, ceph 17.2.5) as I learn and find out better ways
to arrange things.
Now I must have done something wrong and cant find a way to get rid of
this error.
ceph -s
gives HEALTH_WARN, Failed to apply 1 service(s): mon
Using the Dashboard I find the error below showing up every minute. I
have mon-service running on 3 servers. A few days ago a mon-service
gave errors and I removed it. Im not sure if the error showed up
before or after I removed the troublesome service. The error can have
showed up as I tried to move a mon-daemon from one host to another.
I have tried to use
ceph orch ls --service_name=mon --export > myservice.yaml
in order to find a possible error and correct it, but with no success.
Is it this informatin in the error-message that gives me trouble?
192.168.119.1/24 has host bits set
What have I done wrong and how can I correct it?
/Johan
Failed to apply mon spec
ServiceSpec.from_json(yaml.safe_load('''service_type: mon
service_name: mon placement: count: 3 ''')): 192.168.119.1/24 has host
bits set Traceback (most recent call last): File
"/usr/share/ceph/mgr/cephadm/serve.py", line 508, in
_apply_all_services if self._apply_service(spec): File
"/usr/share/ceph/mgr/cephadm/serve.py", line 650, in _apply_service
all_slots, slots_to_add, daemons_to_remove = ha.place() File
"/usr/share/ceph/mgr/cephadm/schedule.py", line 262, in place
candidates = self.get_candidates() # type: List[DaemonPlacement] File
"/usr/share/ceph/mgr/cephadm/schedule.py", line 431, in get_candidates
if self.filter_new_host(h.hostname): File
"/usr/share/ceph/mgr/cephadm/serve.py", line 614, in matches_network
public_network = ipaddress.ip_network(pn) File
"/lib64/python3.6/ipaddress.py", line 74, in ip_network return
IPv4Network(address, strict) File "/lib64/python3.6/ipaddress.py",
line 1519, in __init__ raise ValueError('%s has host bits set' % self)
ValueError: 192.168.119.1/24 has host bits set
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io