What does "ceph orch osd rm status" show before you try the zap? Is your cluster still backfilling to the other OSDs for the PGs that were on the failed disk?
David On Fri, Jan 27, 2023, at 03:25, mailing-lists wrote: > Dear Ceph-Users, > > i am struggling to replace a disk. My ceph-cluster is not replacing the > old OSD even though I did: > > ceph orch osd rm 232 --replace > > The OSD 232 is still shown in the osd list, but the new hdd will be > placed as a new OSD. This wouldnt mind me much, if the OSD was also > placed on the bluestoreDB / NVME, but it doesn't. > > > My steps: > > "ceph orch osd rm 232 --replace" > > remove the failed hdd. > > add the new one. > > Convert the disk within the servers bios, so that the node can have > direct access on it. > > It shows up as /dev/sdt, > > enter maintenance mode > > reboot server > > drive is now /dev/sdm (which the old drive had) > > "ceph orch device zap node-x /dev/sdm " > > A new OSD is placed on the cluster. > > > Can you give me a hint, where did I take a wrong turn? Why is the disk > not being used as OSD 232? > > > Best > > Ken > > _______________________________________________ > ceph-users mailing list -- ceph-users@ceph.io > To unsubscribe send an email to ceph-users-le...@ceph.io _______________________________________________ ceph-users mailing list -- ceph-users@ceph.io To unsubscribe send an email to ceph-users-le...@ceph.io
