You're most welcome!
I'd say that real leak issues are very rare. For example, these are my OSDs
with memory target=16GB which have been running for quite a while, as you
can see they don't exceed 16 GB RSS:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+
COMMAND
92298 167 20 0 18.7g 15.8g 12264 S 1.3 4.2 1974:06
ceph-osd
94527 167 20 0 19.5g 15.8g 12248 S 2.3 4.2 2287:26
ceph-osd
93749 167 20 0 19.1g 15.7g 12804 S 2.3 4.2 1768:22
ceph-osd
89534 167 20 0 20.1g 15.7g 12412 S 4.0 4.2 2512:18
ceph-osd
3706552 167 20 0 20.5g 15.7g 15588 S 2.3 4.2 1385:26
ceph-osd
90297 167 20 0 19.5g 15.6g 12432 S 3.0 4.1 2261:00
ceph-osd
9799 167 20 0 22.9g 15.4g 12432 S 2.0 4.1 2494:00
ceph-osd
9778 167 20 0 23.1g 15.3g 12556 S 2.6 4.1 2591:25
ceph-osd
9815 167 20 0 23.4g 15.1g 12584 S 2.0 4.0 2722:28
ceph-osd
9809 167 20 0 22.3g 15.1g 12068 S 3.6 4.0 5234:52
ceph-osd
9811 167 20 0 23.4g 14.9g 12952 S 2.6 4.0 2593:19
ceph-osd
9819 167 20 0 23.9g 14.9g 12636 S 2.6 4.0 3043:19
ceph-osd
9820 167 20 0 23.3g 14.8g 12884 S 2.0 3.9 3073:43
ceph-osd
9769 167 20 0 22.4g 14.7g 12612 S 2.6 3.9 2840:22
ceph-osd
9836 167 20 0 24.0g 14.7g 12648 S 2.6 3.9 3300:34
ceph-osd
9818 167 20 0 22.0g 14.7g 12152 S 2.3 3.9 5729:06
ceph-osd
Long story short, if you set reasonable targets, OSDs are unlikely to
exceed them during normal operations. If you set memory targets too low, it
is likely that they will be exceeded as OSDs need reasonable amounts of
memory to operate.
/Z
On Thu, 16 Nov 2023 at 08:37, Nguyễn Hữu Khôi <nguyenhuukho...@gmail.com>
wrote:
> Hello. Thank you very much for your explanation.
>
> Because I thought that osd_memory_target will help me limit OSD memory
> usage which will help prevent memory leak - I tried google and many people
> talked about memory leak. A nice man, @Anthony D'Atri <a...@dreamsnake.net> ,
> on this forum helped me to understand that it wont help to limit OSD usage.
>
> I set it to 1GB because I want to see how this option works.
>
> I will read and test with caches options.
>
> Nguyen Huu Khoi
>
>
> On Thu, Nov 16, 2023 at 12:23 PM Zakhar Kirpichenko <zak...@gmail.com>
> wrote:
>
>> Hi,
>>
>> osd_memory_target is a "target", i.e. an OSD make an effort to consume up
>> to the specified amount of RAM, but won't consume less than required for
>> its operation and caches, which have some minimum values such as for
>> example osd_memory_cache_min, bluestore_cache_size,
>> bluestore_cache_size_hdd, bluestore_cache_size_ssd, etc. The recommended
>> and default OSD memory target is 4 GB.
>>
>> Your nodes have a sufficient amount of RAM, thus I don't see why you
>> would want to reduce OSD memory consumption below the recommended defaults,
>> especially considering that in-memory caches are important for Ceph
>> operations as they're many times faster than the fastest storage devices. I
>> run my OSDs with osd_memory_target=17179869184 (16 GB) and it helps,
>> especially with slower HDD-backed OSDs.
>>
>> /Z
>>
>> On Thu, 16 Nov 2023 at 01:02, Nguyễn Hữu Khôi <nguyenhuukho...@gmail.com>
>> wrote:
>>
>>> Hello,
>>> I am using a CEPH cluster. After monitoring it, I set:
>>>
>>> ceph config set osd osd_memory_target_autotune false
>>>
>>> ceph config set osd osd_memory_target 1G
>>>
>>> Then restart all OSD services then do test again, I just use fio commands
>>> from multi clients and I see that OSD memory consume is over 1GB. Would
>>> you
>>> like to help me understand this case?
>>>
>>> Ceph version: Quincy
>>>
>>> OSD: 3 nodes with 11 nvme each and 512GB ram per node.
>>>
>>> CPU: 2 socket xeon gold 6138 cpu with 56 cores per socket.
>>>
>>> Network: 25Gbps x 2 for public network and 25Gbps x 2 for storage
>>> network.
>>> MTU is 9000
>>>
>>> Thank you very much.
>>>
>>>
>>> Nguyen Huu Khoi
>>> _______________________________________________
>>> ceph-users mailing list -- ceph-users@ceph.io
>>> To unsubscribe send an email to ceph-users-le...@ceph.io
>>>
>>
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
