Hi Niz (may I call you "Niz"?)
So, with the info you provided I was able to find what the issue was in
the logs (now I know where the darn things are!) and so we have resolved
our problem - a mis-configured port number - obvious when you think
about it - and so I'd like to thank you once again for all of you
patience and help
Cheers
Dulux-oz
On 05/01/2024 20:39, Nizamudeen A wrote:
ah sorry for that. Outside the cephadm shell, if you do cephadm ls |
grep "mgr.", that should give you the mgr container name. It should
look something like this
[root@ceph-node-00 ~]# cephadm ls | grep "mgr."
"name": "mgr.ceph-node-00.aoxbdg",
"systemd_unit":
"ceph-e877a630-abaa-11ee-b7ce-52540097c...@mgr.ceph-node-00.aoxbdg",
"service_name": "mgr",
and you can use that name to see the logs.
On Fri, Jan 5, 2024 at 3:04 PM duluxoz <dulu...@gmail.com> wrote:
Yeah, that's what I meant when I said I'm new to podman and
containers - so, stupid Q: What is the "typical" name for a given
container eg if the server is "node1" is the management container
"mgr.node1" of something similar?
And thanks for the help - I really *do* appreciate it. :-)
On 05/01/2024 20:30, Nizamudeen A wrote:
ah yeah, its usually inside the container so you'll need to check
the mgr container for the logs.
cephadm logs -n <mgr-container-name>
also cephadm has
its own log channel which can be used to get the logs.
https://docs.ceph.com/en/quincy/cephadm/operations/#watching-cephadm-log-messages
On Fri, Jan 5, 2024 at 2:54 PM duluxoz <dulu...@gmail.com> wrote:
Yeap, can do - are the relevant logs in the "usual" place or
buried somewhere inside some sort of container (typically)? :-)
On 05/01/2024 20:14, Nizamudeen A wrote:
no, the error message is not clear enough to deduce an
error. could you perhaps share the mgr logs at the time of
the error? It could have some tracebacks
which can give more info to debug it further.
Regards,
On Fri, Jan 5, 2024 at 2:00 PM duluxoz <dulu...@gmail.com>
wrote:
Hi Nizam,
Yeap, done all that - we're now at the point of creating
the iSCSI Target(s) for the gateway (via the Dashboard
and/or the CLI: see the error message in the OP) - any
ideas? :-)
Cheers
Dulux-Oz
On 05/01/2024 19:10, Nizamudeen A wrote:
Hi,
You can find the APIs associated with the iscsi here:
https://docs.ceph.com/en/reef/mgr/ceph_api/#iscsi
and if you create iscsi service through dashboard or
cephadm, it should add the iscsi gateways to the dashboard.
you can view them by issuing *ceph dashboard
iscsi-gateway-list* and you can add or remove gateways
manually by
ceph dashboard iscsi-gateway-add -i
<file-containing-gateway-url> [<gateway_name>]
ceph dashboard iscsi-gateway-rm <gateway_name>
which you can find the documentation here:
https://docs.ceph.com/en/quincy/mgr/dashboard/#enabling-iscsi-management
Regards,
Nizam
On Fri, Jan 5, 2024 at 12:53 PM duluxoz
<dulu...@gmail.com> wrote:
Hi All,
A little help please.
TL/DR: Please help with error message:
~~~
REST API failure, code : 500
Unable to access the configuration object
Unable to contact the local API endpoint
(https://localhost:5000/api)
~~~
The Issue
------------
I've been through the documentation and can't find
what I'm looking for
- possibly because I'm not really sure what it is I
*am* looking for, so
if someone can point me in the right direction I
would really appreciate it.
I get the above error message when I run the
`gwcli` command from inside
a cephadm shell.
What I'm trying to do is set up a set of iSCSI
Gateways in our Ceph-Reef
18.2.1 Cluster (yes, I know its being depreciated
as of Nov 22 - or
whatever). We recently migrated 7 upgraded from a
manual install of
Quincy to a CephAdm install of Reef - everything
went AOK *except* for
the iSCSI Gateways. So we tore them down and then
rebuilt them as per
the latest documentation. So now we've got 3
gateways as per the Service
page of the Dashboard and I'm trying to create the
targets.
I tried via the Dashboard but had errors, so
instead I went in to do it
via gwcli and hit the above error (which I now
bevel to be the cause of
the GUI creation I encountered.
I have absolutely no experience with podman or
containers in general,
and can't work out how to fix the issue. So I'm
requesting some help -
not to solve the problem for me, but to point me in
the right direction
to solve it myself. :-)
So, anyone?
Cheers
Dulux-Oz
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to
ceph-users-le...@ceph.io
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io