Probably should mention that the "ceph osd create" command will output what the
new {osd-number} should be.
Thanks for making the change so fast.
Joe
----- Original Message -----
From: "John Wilkins" <john.wilk...@inktank.com>
To: "Joe Ryner" <jry...@cait.org>
Cc: ceph-users@lists.ceph.com
Sent: Thursday, April 11, 2013 2:37:33 PM
Subject: Re: [ceph-users] Documentation Error in Adding/Removing OSDs
Thanks Joe! I've made the change. You should see it up on the site shortly.
On Thu, Apr 11, 2013 at 10:00 AM, Joe Ryner < jry...@cait.org > wrote:
Hi,
I have found some issues in:
http://ceph.com/docs/master/rados/operations/add-or-rm-osds
In the adding section:
Step 6 Should be ran before 1-5 as it outputs the OSD number when it exits. I
had a really hard time figuring this out. I am currently running 0.56.4 on RHEL
6. The First 5 steps imply that you can pick an osd-number out of the either
but really you have to use the osd number outputted by step 6.
The following discussion help me figure this out.
http://comments.gmane.org/gmane.comp.file-systems.ceph.devel/11339
Thanks,
Joe
--
Joe Ryner
Center for the Application of Information Technologies (CAIT)
Production Coordinator
P: (309) 298-1804
F: (309) 298-2806
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
John Wilkins
Senior Technical Writer
Intank
john.wilk...@inktank.com
(415) 425-9599
http://inktank.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
