On Tue, Apr 23, 2013 at 3:37 PM, Bryan Stillwell <bstillw...@photobucket.com> wrote: > I'm using the kernel client that's built into precise & quantal. > > I could give the ceph-fuse client a try and see if it has the same > issue. I haven't used it before, so I'll have to do some reading > first.
If you've got the time that would be a good data point, and make debugging easier if it reproduces. There's not a ton to learn — you install the ceph-fuse package (I think it's packaged separately, anyway) and then instead of "mount" you run "ceph-fuse -c <ceph.conf file> --name client.<name> --keyring <keyring_file>" or similar. :) -Greg Software Engineer #42 @ http://inktank.com | http://ceph.com > > Bryan > > On Tue, Apr 23, 2013 at 4:04 PM, Gregory Farnum <g...@inktank.com> wrote: >> Sorry, I meant kernel client or ceph-fuse? Client logs would be enough >> to start with, I suppose — "debug client = 20" and "debug ms = 1" if >> using ceph-fuse; if using the kernel client things get tricker; I'd >> have to look at what logging is available without the debugfs stuff >> being enabled. :/ >> -Greg >> Software Engineer #42 @ http://inktank.com | http://ceph.com >> >> >> On Tue, Apr 23, 2013 at 3:00 PM, Bryan Stillwell >> <bstillw...@photobucket.com> wrote: >>> I've tried a few different ones: >>> >>> 1. cp to cephfs mounted filesystem on Ubuntu 12.10 (quantal) >>> 2. rsync over ssh to cephfs mounted filesystem on Ubuntu 12.04.2 (precise) >>> 3. scp to cephfs mounted filesystem on Ubuntu 12.04.2 (precise) >>> >>> It's fairly reproducible, so I can collect logs for you. Which ones >>> would you be interested in? >>> >>> The cluster has been in a couple states during testing (during >>> expansion/rebalancing and during an all active+clean state). >>> >>> BTW, all the nodes are running with the 0.56.4-1precise packages. >>> >>> Bryan >>> >>> On Tue, Apr 23, 2013 at 12:56 PM, Gregory Farnum <g...@inktank.com> wrote: >>>> On Tue, Apr 23, 2013 at 11:38 AM, Bryan Stillwell >>>> <bstillw...@photobucket.com> wrote: >>>>> I've run into an issue where after copying a file to my cephfs cluster >>>>> the md5sums no longer match. I believe I've tracked it down to some >>>>> parts of the file which are missing: >>>>> >>>>> $ obj_name=$(cephfs "title1.mkv" show_location -l 0 | grep object_name >>>>> | sed -e "s/.*:\W*\([0-9a-f]*\)\.[0-9a-f]*/\1/") >>>>> $ echo "Object name: $obj_name" >>>>> Object name: 10000001120 >>>>> >>>>> $ file_size=$(stat "title1.mkv" | grep Size | awk '{ print $2 }') >>>>> $ printf "File size: %d MiB (%d Bytes)\n" $(($file_size/1048576)) >>>>> $file_size >>>>> File size: 20074 MiB (21049178117 Bytes) >>>>> >>>>> $ blocks=$((file_size/4194304+1)) >>>>> $ printf "Blocks: %d\n" $blocks >>>>> Blocks: 5019 >>>>> >>>>> $ for b in `seq 0 $(($blocks-1))`; do rados -p data stat >>>>> ${obj_name}.`printf '%8.8x\n' $b` | grep "error"; done >>>>> error stat-ing data/10000001120.00001076: No such file or directory >>>>> error stat-ing data/10000001120.000011c7: No such file or directory >>>>> error stat-ing data/10000001120.0000129c: No such file or directory >>>>> error stat-ing data/10000001120.000012f4: No such file or directory >>>>> error stat-ing data/10000001120.00001307: No such file or directory >>>>> >>>>> >>>>> Any ideas where to look to investigate what caused these blocks to not >>>>> be written? >>>> >>>> What client are you using to write this? Is it fairly reproducible (so >>>> you could collect logs of it happening)? >>>> >>>> Usually the only times I've seen anything like this were when either >>>> the file data was supposed to go into a pool which the client didn't >>>> have write permissions on, or when the RADOS cluster was in bad shape >>>> and so the data never got flushed to disk. Has your cluster been >>>> healthy since you started writing the file out? >>>> -Greg >>>> Software Engineer #42 @ http://inktank.com | http://ceph.com >>>> >>>> >>>>> >>>>> Here's the current state of the cluster: >>>>> >>>>> ceph -s >>>>> health HEALTH_OK >>>>> monmap e1: 1 mons at {a=172.24.88.50:6789/0}, election epoch 1, quorum >>>>> 0 a >>>>> osdmap e22059: 24 osds: 24 up, 24 in >>>>> pgmap v1783615: 1920 pgs: 1917 active+clean, 3 >>>>> active+clean+scrubbing+deep; 4667 GB data, 9381 GB used, 4210 GB / >>>>> 13592 GB avail >>>>> mdsmap e437: 1/1/1 up {0=a=up:active} >>>>> >>>>> Here's my current crushmap: >>>>> >>>>> # begin crush map >>>>> >>>>> # devices >>>>> device 0 osd.0 >>>>> device 1 osd.1 >>>>> device 2 osd.2 >>>>> device 3 osd.3 >>>>> device 4 osd.4 >>>>> device 5 osd.5 >>>>> device 6 osd.6 >>>>> device 7 osd.7 >>>>> device 8 osd.8 >>>>> device 9 osd.9 >>>>> device 10 osd.10 >>>>> device 11 osd.11 >>>>> device 12 osd.12 >>>>> device 13 osd.13 >>>>> device 14 osd.14 >>>>> device 15 osd.15 >>>>> device 16 osd.16 >>>>> device 17 osd.17 >>>>> device 18 osd.18 >>>>> device 19 osd.19 >>>>> device 20 osd.20 >>>>> device 21 osd.21 >>>>> device 22 osd.22 >>>>> device 23 osd.23 >>>>> >>>>> # types >>>>> type 0 osd >>>>> type 1 host >>>>> type 2 rack >>>>> type 3 row >>>>> type 4 room >>>>> type 5 datacenter >>>>> type 6 pool >>>>> >>>>> # buckets >>>>> host b1 { >>>>> id -2 # do not change unnecessarily >>>>> # weight 2.980 >>>>> alg straw >>>>> hash 0 # rjenkins1 >>>>> item osd.0 weight 0.500 >>>>> item osd.1 weight 0.500 >>>>> item osd.2 weight 0.500 >>>>> item osd.3 weight 0.500 >>>>> item osd.4 weight 0.500 >>>>> item osd.20 weight 0.480 >>>>> } >>>>> host b2 { >>>>> id -4 # do not change unnecessarily >>>>> # weight 4.680 >>>>> alg straw >>>>> hash 0 # rjenkins1 >>>>> item osd.5 weight 0.500 >>>>> item osd.6 weight 0.500 >>>>> item osd.7 weight 2.200 >>>>> item osd.8 weight 0.500 >>>>> item osd.9 weight 0.500 >>>>> item osd.21 weight 0.480 >>>>> } >>>>> host b3 { >>>>> id -5 # do not change unnecessarily >>>>> # weight 3.480 >>>>> alg straw >>>>> hash 0 # rjenkins1 >>>>> item osd.10 weight 0.500 >>>>> item osd.11 weight 0.500 >>>>> item osd.12 weight 1.000 >>>>> item osd.13 weight 0.500 >>>>> item osd.14 weight 0.500 >>>>> item osd.22 weight 0.480 >>>>> } >>>>> host b4 { >>>>> id -6 # do not change unnecessarily >>>>> # weight 3.480 >>>>> alg straw >>>>> hash 0 # rjenkins1 >>>>> item osd.15 weight 0.500 >>>>> item osd.16 weight 1.000 >>>>> item osd.17 weight 0.500 >>>>> item osd.18 weight 0.500 >>>>> item osd.19 weight 0.500 >>>>> item osd.23 weight 0.480 >>>>> } >>>>> pool default { >>>>> id -1 # do not change unnecessarily >>>>> # weight 14.620 >>>>> alg straw >>>>> hash 0 # rjenkins1 >>>>> item b1 weight 2.980 >>>>> item b2 weight 4.680 >>>>> item b3 weight 3.480 >>>>> item b4 weight 3.480 >>>>> } >>>>> >>>>> # rules >>>>> rule data { >>>>> ruleset 0 >>>>> type replicated >>>>> min_size 2 >>>>> max_size 10 >>>>> step take default >>>>> step chooseleaf firstn 0 type host >>>>> step emit >>>>> } >>>>> rule metadata { >>>>> ruleset 1 >>>>> type replicated >>>>> min_size 2 >>>>> max_size 10 >>>>> step take default >>>>> step chooseleaf firstn 0 type host >>>>> step emit >>>>> } >>>>> rule rbd { >>>>> ruleset 2 >>>>> type replicated >>>>> min_size 1 >>>>> max_size 10 >>>>> step take default >>>>> step chooseleaf firstn 0 type host >>>>> step emit >>>>> } >>>>> >>>>> # end crush map >>>>> >>>>> >>>>> Thanks, >>>>> Bryan >>>>> _______________________________________________ >>>>> ceph-users mailing list >>>>> ceph-users@lists.ceph.com >>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > -- > > > Bryan Stillwell > SENIOR SYSTEM ADMINISTRATOR > > E: bstillw...@photobucket.com > O: 303.228.5109 > M: 970.310.6085 _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com