Hello All,
I have deployed Ceph with ceph-deploy on three nodes. Each node is
currently play double duty as both a monitor node and an osd node.
This is what my cluster looked like before I rebooted the one node:
>> root@red6:~# ceph -s
>> health HEALTH_OK
>> monmap e2: 3 mons at {kitt=
192.168.0.35:6789/0,red6=192.168.0.40:6789/0,shepard=192.168.0.2:6789/0},
election epoch 10, quorum 0,1,2 kitt,red6,shepard
>> osdmap e29: 7 osds: 7 up, 7 in
>> pgmap v1692: 192 pgs: 192 active+clean; 19935 MB data, 40441 MB
used, 4539 GB / 4580 GB avail; 73B/s rd, 0op/s
>> mdsmap e1: 0/0/1 up
Last week, I rebooted one of my nodes (kitt), and after it rebooted, I was
unable to get it to rejoin the cluster.
Typically, I've been able to use ceph-deploy to delete the monitor then
deploy the monitor and everything goes back to normal.
That didn't work this time, so that monitor and those two osds were out of
the cluster. I think when I rebooted the node,
I got errors that the mon was unreachable and it was taken out of the
monmap. When I tried to delete the monitor ceph-deploy
was telling me there was not monitor to delete. When I ran ceph-deploy to
deploy the monitor I received no errors, but the monitor never started.
I've tried a number of things in the docs, but something seems amiss
because when I try to restart monitors or osds, the init script tells me
it's not found.
I've copied my ceph.conf at the end of this e-mail.
>> root@shepard:~# ls /var/lib/ceph/mon/
>> ceph-shepard
>> root@shepard:~# /etc/init.d/ceph restart mon.shepard
>> /etc/init.d/ceph: mon.shepard not found (/etc/ceph/ceph.conf defines ,
/var/lib/ceph defines )
(I've also tried mon.0 .. mon.3 )
Same thing with osds:
>> root@shepard:~# ls /var/lib/ceph/osd/
>> ceph-3 ceph-4 ceph-6 sdb.journal sdc.journal sdd.journal
>> root@shepard:~# /etc/init.d/ceph restart osd.4
>> /etc/init.d/ceph: osd.4 not found (/etc/ceph/ceph.conf defines ,
/var/lib/ceph defines )
(I've tried every iteration I can think of, using `service ceph restart`,
I've also tried both iterations with the -a flag e.g. `service ceph -a
restart`, and stop/start instead of restart, also with and without the -a
flag)
That's about where I left it last week, before my work week started. Other
than occasionally reporting something to the effect of:
>> 2013-06-09 11:46:14.978350 7f8098e9a700 0 -- :/18915 >>
192.168.0.35:6789/0 pipe(0x7f8090002ca0 sd=4 :0 s=1 pgs=0 cs=0 l=1).fault
when I ran ceph -s , ceph health reported OK, so I figured it was ok to
leave until I was off shift and had the cycles to devote to it...
I really do know better.
Last night I experienced a power outage, and all of my nodes hard rebooted.
Now when I run ceph health (or use any of the ceph or ceph-deploy tools),
I get the following error message:
>> 2013-06-09 12:12:14.692484 7f4506e0e700 0 -- :/24787 >>
192.168.0.40:6789/0 pipe(0x7f44fc000c00 sd=4 :0 s=1 pgs=0 cs=0 l=1).fault
>> 2013-06-09 12:12:17.692509 7f450d5a0700 0 -- :/24787 >>
192.168.0.35:6789/0 pipe(0x7f44fc003010 sd=4 :0 s=1 pgs=0 cs=0 l=1).fault
>> 2013-06-09 12:12:20.692469 7f4506e0e700 0 -- :/24787 >>
192.168.0.2:6789/0 pipe(0x7f44fc0038c0 sd=4 :0 s=1 pgs=0 cs=0 l=1).fault
this was run on the shepard node (192.168.0.2), but I get the same error
from all of the nodes.
I do see a number of ceph processes
>> root@shepard:~# ps aux | grep ceph
>> root 1041 0.0 0.0 33680 7100 ? Ss 06:11 0:18
/usr/bin/python /usr/sbin/ceph-create-keys --cluster=ceph -i shepard
>> root 1538 0.0 0.0 378904 4284 ? Sl 06:11 0:04 ceph
--cluster=ceph --name=osd.3 --keyring=/var/lib/ceph/osd/ceph-3/keyring osd
crush create-or-move -- 3 0.45 root=default host=shepard
>> root 1581 0.0 0.0 378904 4300 ? Sl 06:11 0:04 ceph
--cluster=ceph --name=osd.6 --keyring=/var/lib/ceph/osd/ceph-6/keyring osd
crush create-or-move -- 6 0.91 root=default host=shepard
>> root 1628 0.0 0.0 378904 4296 ? Sl 06:11 0:04 ceph
--cluster=ceph --name=osd.4 --keyring=/var/lib/ceph/osd/ceph-4/keyring osd
crush create-or-move -- 4 0.45 root=default host=shepard
However, I don't see the monitor process actually running.
My first question is, how can I restart ceph processes?
My second question is, am I on the right track here? My hypothesis is
starting the monitors will get things going again, because there is nothing
is listening on those ports:
>> root@shepard:~# telnet 192.168.0.2 6789
>> Trying 192.168.0.2...
>> telnet: Unable to connect to remote host: Connection refused
>> root@shepard:~# netstat -anp | grep ceph
>> root@shepard:~# netstat -anp | grep 6789
Actually, I just rebooted this node again and now the osds are not running.
only ceph-create-keys.
My last question is where does ceph-deploy create the configs? I have the
original files in a directory where I ran ceph deploy,
and I know about the /etc/ceph/ceph.conf file, but there seems to be some
other config that the cluster is pulling from.
Maybe I'm mistaken, but there are no osds in my ceph.conf.
Thanks for all your help.
Jon A
ceph.conf file:
[global]
fsid = 86f293d0-bec7-4694-ace7-af3fbaa98736
mon_initial_members = red6, kitt, shepard
mon_host = 192.168.0.40,192.168.0.35,192.168.0.2
auth_supported = cephx
osd_journal_size = 1024
filestore_xattr_use_omap = true
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
