On 09/16/2013 11:29 AM, Nico Massenberg wrote:
Am 16.09.2013 um 11:25 schrieb Wido den Hollander <w...@42on.com>:
On 09/16/2013 11:18 AM, Nico Massenberg wrote:
Hi there,
I have successfully setup a ceph cluster with a healthy status.
When trying to create a rbd block device image I am stuck with an error which I
have to ctrl+c:
ceph@vl0181:~/konkluster$ rbd create imagefoo --size 5120 --pool kontrastpool
2013-09-16 10:59:06.838235 7f3bcb9eb700 0 -- 192.168.111.109:0/1013698 >>
192.168.111.10:6806/3750 pipe(0x1fdfb00 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x1fdfd60).fault
Any ideas anyone?
Is the Ceph cluster healthy?
Yes it is.
What does 'ceph -s' say?
ceph@vl0181:~/konkluster$ ceph -s
cluster 3dad736b-a9fc-42bf-a2fb-399cb8cbb880
health HEALTH_OK
monmap e3: 3 mons at
{ceph01=192.168.111.10:6789/0,ceph02=192.168.111.11:6789/0,ceph03=192.168.111.12:6789/0},
election epoch 52, quorum 0,1,2 ceph01,ceph02,ceph03
osdmap e230: 12 osds: 12 up, 12 in
pgmap v3963: 292 pgs: 292 active+clean; 0 bytes data, 450 MB used, 6847 GB
/ 6847 GB avail
mdsmap e1: 0/0/1 up
If the cluster is healthy it seems like this client can't contact the Ceph
cluster.
I have no problems contacting any node/monitor from the admin machine via ping
or telnet.
It seems like the first monitor (ceph01) is not responding properly, is
that one reachable?
And if you leave the rbd command running for some time, will it work
eventually?
Wido
Thanks, Nico
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Wido den Hollander
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Wido den Hollander
42on B.V.
Phone: +31 (0)20 700 9902
Skype: contact42on
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
