Hi All,
I did a fresh install of Ceph (this might be like 10th or 11th install) on 4
new VMs (one admin, one MON and two OSDs) built from CentOS 6.4 (x64) .iso ,
did a yum update on all of them. They are all running on vmware ESXi 5.1.0. I
did everything sage et al suggested (i.e. creation of /ceph/osd* and making
sure /etc/ceph is present on all nodes. /etc/ceph gets created all the
ceph-deploy install and contains rbdmap FYI). Unusually, I ended up with the
same problem while activating OSDs (the last 4 lines keep going on and on
forever):
2013-11-06 14:37:39,626 [ceph_deploy.cli][INFO ] Invoked (1.3):
/usr/bin/ceph-deploy osd activate ceph-node2-osd0-centos-6-4:/ceph/osd0
ceph-node3-osd1-centos-6-4:/ceph/osd1
2013-11-06 14:37:39,627 [ceph_deploy.osd][DEBUG ] Activating cluster ceph disks
ceph-node2-osd0-centos-6-4:/ceph/osd0: ceph-node3-osd1-centos-6-4:/ceph/osd1:
2013-11-06 14:37:39,901 [ceph-node2-osd0-centos-6-4][DEBUG ] connected to host:
ceph-node2-osd0-centos-6-4
2013-11-06 14:37:39,902 [ceph-node2-osd0-centos-6-4][DEBUG ] detect platform
information from remote host
2013-11-06 14:37:39,917 [ceph-node2-osd0-centos-6-4][DEBUG ] detect machine type
2013-11-06 14:37:39,925 [ceph_deploy.osd][INFO ] Distro info: CentOS 6.4 Final
2013-11-06 14:37:39,925 [ceph_deploy.osd][DEBUG ] activating host
ceph-node2-osd0-centos-6-4 disk /ceph/osd0
2013-11-06 14:37:39,925 [ceph_deploy.osd][DEBUG ] will use init type: sysvinit
2013-11-06 14:37:39,925 [ceph-node2-osd0-centos-6-4][INFO ] Running command:
sudo ceph-disk-activate --mark-init sysvinit --mount /ceph/osd0
2013-11-06 14:37:40,145 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06
14:37:41.075310 7fac2414c700 0 -- :/1029546 >> 10.12.0.70:6789/0
pipe(0x7fac20024480 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac200246e0).fault
2013-11-06 14:37:43,167 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06
14:37:44.071697 7fac1ebfd700 0 -- :/1029546 >> 10.12.0.70:6789/0
pipe(0x7fac14000c00 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14000e60).fault
2013-11-06 14:37:46,140 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06
14:37:47.071938 7fac2414c700 0 -- :/1029546 >> 10.12.0.70:6789/0
pipe(0x7fac14003010 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14003270).fault
2013-11-06 14:37:50,165 [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-06
14:37:51.071245 7fac1ebfd700 0 -- :/1029546 >> 10.12.0.70:6789/0
pipe(0x7fac14003a70 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7fac14003cd0).fault
It might be bad luck but I want to try a manual installation without
ceph-deploy because it seems I am jinxed with ceph-deploy. Could anyone please
forward me the steps. I am happy to share the ceph.log with anyone who would
like to research on this error but I don't a have clue.
Thanks a lot!
Narendra Trivedi | savviscloud
This message contains information which may be confidential and/or privileged.
Unless you are the intended recipient (or authorized to receive for the
intended recipient), you may not read, use, copy or disclose to anyone the
message or any information contained in the message. If you have received the
message in error, please advise the sender by reply e-mail and delete the
message and any attachment(s) thereto without retaining any copies.
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com