Hello, I think you misunderstood me. I known how can I replace bad HDD, thanks. My problem is the following:
Object replica number is 3. Objects that in 11.15d PG which store data on osd.0 bad sectors place inter alia. Ceph should know objects are in 11.15d on osd.0 is bad (because deep-scrub and repair are both failed), so there is no 3 clean replica number only two. I think Ceph should replicate its to new osd. Or not? Thank you, Mihaly 2013/11/13 David Zafman <david.zaf...@inktank.com> > > Since the disk is failing and you have 2 other copies I would take osd.0 > down. This means that ceph will not attempt to read the bad disk either > for clients or to make another copy of the data: > > ***** Not sure about the syntax of this for the version of ceph you are > running > ceph osd down 0 > > Mark it “out” which will immediately trigger recovery to create more > copies of the data with the remaining OSDs. > ceph osd out 0 > > You can now finish the process of removing the osd by looking at these > instructions: > > > http://ceph.com/docs/master/rados/operations/add-or-rm-osds/#removing-osds-manual > > David Zafman > Senior Developer > http://www.inktank.com > > On Nov 12, 2013, at 3:16 AM, Mihály Árva-Tóth < > mihaly.arva-t...@virtual-call-center.eu> wrote: > > > Hello, > > > > I have 3 node, with 3 OSD in each node. I'm using .rgw.buckets pool with > 3 replica. One of my HDD (osd.0) has just bad sectors, when I try to read > an object from OSD direct, I get Input/output errror. dmesg: > > > > [1214525.670065] mpt2sas0: log_info(0x31080000): originator(PL), > code(0x08), sub_code(0x0000) > > [1214525.670072] mpt2sas0: log_info(0x31080000): originator(PL), > code(0x08), sub_code(0x0000) > > [1214525.670100] sd 0:0:2:0: [sdc] Unhandled sense code > > [1214525.670104] sd 0:0:2:0: [sdc] > > [1214525.670107] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > > [1214525.670110] sd 0:0:2:0: [sdc] > > [1214525.670112] Sense Key : Medium Error [current] > > [1214525.670117] Info fld=0x60c8f21 > > [1214525.670120] sd 0:0:2:0: [sdc] > > [1214525.670123] Add. Sense: Unrecovered read error > > [1214525.670126] sd 0:0:2:0: [sdc] CDB: > > [1214525.670128] Read(16): 88 00 00 00 00 00 06 0c 8f 20 00 00 00 08 00 > 00 > > > > Okay I known need to replace HDD. > > > > Fragment of ceph -s output: > > pgmap v922039: 856 pgs: 855 active+clean, 1 active+clean+inconsistent; > > > > ceph pg dump | grep inconsistent > > > > 11.15d 25443 0 0 0 6185091790 3001 3001 > active+clean+inconsistent 2013-11-06 02:30:45.23416..... > > > > ceph pg map 11.15d > > > > osdmap e1600 pg 11.15d (11.15d) -> up [0,8,3] acting [0,8,3] > > > > pg repair or deep-scrub can not fix this issue. But if I understand > correctly, osd has to known it can not retrieve object from osd.0 and need > to be replicate an another osd because there is no 3 working replicas now. > > > > Thank you, > > Mihaly > > _______________________________________________ > > ceph-users mailing list > > ceph-users@lists.ceph.com > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
