Yuri,

The "mon addr" directive is expecting an IP address in standard IPv4
decimal notation, i.e. "10.212.117.78:6969". If you change your config to
reflect that you should have better luck :)

-Aaron


On Wed, Dec 18, 2013 at 1:02 PM, Yuri Weinstein <[email protected]>wrote:

> I was not able to deploy Ceph on multiple hosts, AND assuming that I
> don't know some small "know hows" decided to minimize the risk of
> unknowns and  deploy on a single box, using these 5-min steps -
> http://ceph.com/docs/bobtail/start/quick-start/
>
> Everything looks very straightforward and simple.
>
> Here is my ceph.conf file:
>
> [osd]
>         osd journal size = 1000
>         filestore xattr use omap = true
>
> [mon.a]
>         host = ip-10-212-117-78
>         mon addr=10-212-117-78:6969
>
> [osd.0]
>         host = ip-10-212-117-78
>
> [osd.1]
>         host = ip-10-212-117-78
>
> [mds.a]
>         host = ip-10-212-117-78
>
> (I tried changing the porting assuming that it may not be open on my
> Ubuntu instance).
> However, when I run
>
> sudo mkcephfs -a -c /etc/ceph/ceph.conf -k ceph.keyring
>
> I get error:
>
> ubuntu@ip-10-212-117-78:/etc/ceph$ sudo mkcephfs -a -c
> /etc/ceph/ceph.conf -k ceph.keyring
>
> temp dir is /tmp/mkcephfs.9uVn8o1L8c
>
> preparing monmap in /tmp/mkcephfs.9uVn8o1L8c/monmap
>
> /usr/bin/monmaptool --create --clobber --add a 10-212-117-78:6969
> --print /tmp/mkcephfs.9uVn8o1L8c/monmap
>
> /usr/bin/monmaptool: invalid ip:port '10-212-117-78:6969'
>
>
> WARNING: mkcephfs is now deprecated in favour of ceph-deploy. Please see:
>
>  http://github.com/ceph/ceph-deploy
>
> What does it mean and how to work around this?
>
> Thx!
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>



-- 
Aaron Ten Clay
http://www.aarontc.com/
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to