On Wed, Apr 9, 2014 at 4:45 AM, Mark Kirkwood <mark.kirkw...@catalyst.net.nz> wrote: > Hi Karan, > > Just to double check - run the same command after ssh'ing into each of the > osd hosts, and maybe again on the monitor hosts too (just in case you have > *some* hosts successfully updated to 0.79 and some still on < 0.78).
Just as a sanity check, erasure coding *is* present in 0.79 as installed from scratch from the packages that were built. The problem seems to be a combination of an upgrade with monitors that have not been restarted. This cannot be replicated otherwise. > > Regards > > Mark > > > On 08/04/14 22:32, Karan Singh wrote: >> >> Hi Loic >> >> Here is the output >> >> # ceph --version >> ceph version 0.79 (4c2d73a5095f527c3a2168deb5fa54b3c8991a6e) >> # >> > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com