Hi Gandalf,

I tried to dump journal partition scheme from the old SSD:

sgdisk --backup=/tmp/journal_table /dev/sdg

and then restore the journal partition scheme to the new SSD after it's
replaced:

sgdisk --restore-backup=/tmp/journal_table /dev/sdg

and it doesn't work. :( parted -l doesn't show the correct partition table
after restore, and mkjournal command failed.

Is it because the new SSD is of different model and size? The old SSD is a
Seagate 100GB and the new SSD is a Crucial 256GB.

Looking forward to your reply, thank you.

Cheers.



On Fri, May 9, 2014 at 9:58 PM, Gandalf Corvotempesta <
gandalf.corvotempe...@gmail.com> wrote:

> 2014-05-09 15:55 GMT+02:00 Sage Weil <s...@inktank.com>:
> > This looks correct to me!
>
> Some command to automate this in ceph would be nice.
> For example, skipping the "mkjournal" step:
>
> ceph-osd -i 30 --mkjournal
> ceph-osd -i 31 --mkjournal
>
> ceph should be smarth enough to automatically make journals if missing
> so that a single "/etc/init.d/ceph start osd" would be enough
>
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to