Hello,
>From the output we can also see that the server fails to install wget. On each on your servers you have to set the proxy environment variables: https_proxy, http_proxy etc.. For redhat/centos you can do it globally in a file in /etc/profile.d For ubuntu / debian you have to define it in /etc/environment and in the apt configuration. Regards, Luc. ----- Mail original ----- De: "Yuriy Grabar" <yhra...@softserveinc.com> À: "Zhe Zhang" <zhe_zh...@symantec.com>, ceph-users@lists.ceph.com Cc: rglo...@cisco.com, "Vladyslav Dehtiar -X (vdehtiar - SOFTSERVE INC at Cisco) (vdeht...@cisco.com)" <vdeht...@cisco.com> Envoyé: Mardi 17 Juin 2014 11:45:51 Objet: Re: [ceph-users] Assistance in deploying Ceph cluster Hi Zhe, Please find attached output. We use https proxy server in our Lab. It seems that ‘deploy script’ cannot get access to https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc I set the next string (export https_proxy=http://proxy-wsa.esl.cisco.com:80) to ~/.bash_profile and it didn’t help Regards Yuriy From: Zhe Zhang [mailto:zhe_zh...@symantec.com] Sent: Tuesday, June 17, 2014 2:16 AM To: Yuriy Grabar; ceph-users@lists.ceph.com Cc: Vladyslav Dehtiar -X (vdehtiar - SOFTSERVE INC at Cisco) (vdeht...@cisco.com); rglo...@cisco.com Subject: RE: [ceph-users] Assistance in deploying Ceph cluster What is your “hostname –s” ? In ~/.ssh/config file, you have to configure the hostname the same as what shows with “hostname –s” Zhe From: ceph-users [ mailto:ceph-users-boun...@lists.ceph.com ] On Behalf Of Yuriy Grabar Sent: Monday, June 16, 2014 2:41 AM To: ceph-users@lists.ceph.com Cc: Vladyslav Dehtiar -X (vdehtiar - SOFTSERVE INC at Cisco) ( vdeht...@cisco.com ); rglo...@cisco.com Subject: [ceph-users] Assistance in deploying Ceph cluster Hello everyone, We are looking for support in installing Ceph cluster (1 admin node + 3 node, based on Centos 6.5 Vsphere Vm’s) We observe some errors in executing ceph-deploy commands. (all keys and permissions are configured correctly) There is attached log of execution for “ceph-deploy install node1” command. Seems that curl script tries to connect using ipv6 address. Node1 has only one network interface. Note: We had tried to disable ipv6 protocol on node1 side, anyway we faced error like “host not found” According attached log, We understand that problem is in importing rpm key. If I run ‘rmp import’ manually, it executes on Node1 successfully. Also we know that instead of using ‘ceph-deploy install’ command we can manually install Ceph service and related tools on Node1 side, but would we like to follow guidance on official site ( http://ceph.com/docs/master/start/quick-ceph-deploy/ ) as it was developed for that. Please suggest me what could be wrong in configuration from my side. Thanks and Regards, Yuriy Hrabar Quality Control engineer cid:image001.gif@01CD1811.D6705890 52 V.Velykoho, Lviv 79053, Ukraine Tel: +380-32-240-9090 x 3290 Cell: +380-50-430-3066 Fax: +380-32-240-9080 _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com -- Luc Dumaine / SITIV Ingénieur système et réseaux lduma...@sitiv.fr Fixe : 04.72.89.02.12 Mobile : 06.73.15.99.97 Fax : 04.78.67.66.25 _______________________________________________________________________ Le SITIV décline toute responsabilité quant au contenu de ce message. Ce message et les pièces jointes qui y sont attachées sont confidentiels et établis à l'attention exclusive de leur destinataire. Si vous pensez l'avoir reçu par erreur, merci de bien vouloir en aviser immédiatement l'expéditeur, de ne pas l'utiliser sous quelque forme que ce soit et de le détruire immédiatement. Toute divulgation, utilisation, diffusion ou reproduction du message ou des informations qu'il contient doit être préalablement autorisée par l'expéditeur.
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
