Also, did you successfully start your monitor(s), and define/create the OSDs within the Ceph cluster itself?
There are several steps to creating a Ceph cluster manually. I'm unsure if you have done the steps to actually create and register the OSDs with the cluster. - Travis On Wed, Feb 25, 2015 at 9:49 AM, Leszek Master <keks...@gmail.com> wrote: > Check firewall rules and selinux. It sometimes is a pain in the ... :) > 25 lut 2015 01:46 "Barclay Jameson" <almightybe...@gmail.com> napisał(a): > > I have tried to install ceph using ceph-deploy but sgdisk seems to >> have too many issues so I did a manual install. After mkfs.btrfs on >> the disks and journals and mounted them I then tried to start the osds >> which failed. The first error was: >> #/etc/init.d/ceph start osd.0 >> /etc/init.d/ceph: osd.0 not found (/etc/ceph/ceph.conf defines , >> /var/lib/ceph defines ) >> >> I then manually added the osds to the conf file with the following as >> an example: >> [osd.0] >> osd_host = node01 >> >> Now when I run the command : >> # /etc/init.d/ceph start osd.0 >> >> There is no error or output from the command and in fact when I do a >> ceph -s no osds are listed as being up. >> Doing as ps aux | grep -i ceph or ps aux | grep -i osd shows there are >> no osd running. >> I also have done htop to see if any process are running and none are >> shown. >> >> I had this working on SL6.5 with Firefly but Giant on Centos 7 has >> been nothing but a giant pain. >> _______________________________________________ >> ceph-users mailing list >> ceph-users@lists.ceph.com >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
