You can give a try with swift API as well. **************************************************************** Karan Singh Systems Specialist , Storage Platforms CSC - IT Center for Science, Keilaranta 14, P. O. Box 405, FIN-02101 Espoo, Finland mobile: +358 503 812758 tel. +358 9 4572001 fax +358 9 4572302 http://www.csc.fi/ ****************************************************************
> On 13 Apr 2015, at 15:19, Francois Lafont <flafdiv...@free.fr> wrote: > > Karan Singh wrote: > >> Things you can check >> >> * Is RGW node able to resolve bucket-2.ostore.athome.priv , try ping >> bucket-2.ostore.athome.priv > > Yes, my DNS configuration is ok. In fact, I test s3cmd directly > on my radosgw (its hostname is "ceph-radosgw1" but its fqdn is > "ostore.athome.priv"): > > ----------------------------------- > ~# hostname > ceph-radosgw1 > > ~# ip addr show dev eth0 | grep 'inet ' > inet 172.31.10.6/16 brd 172.31.255.255 scope global eth0 > > ~# dig +short ostore.athome.priv \ > bucket-2.ostore.athome.priv \ > foo.ostore.athome.priv \ > bar.ostore.athome.priv \ > hjffhkj.ostore.athome.priv > 172.31.10.6 > 172.31.10.6 > 172.31.10.6 > 172.31.10.6 > 172.31.10.6 > > ~# getent hosts ostore.athome.priv > 172.31.10.6 ostore.athome.priv > > ~# getent hosts jfkjfl.ostore.athome.priv > 172.31.10.6 jfkjfl.ostore.athome.priv > ----------------------------------- > >> * Is # s3cmd ls working or throwing errors ? > > It doesn't work after upgrading with Hammer too. More > precisely, in Firefly radosgw, It works: > > ----------------------------------- > ~# s3cmd ls s3://bucket > 2015-04-12 23:35 735985664 s3://bucket/les_evades.avi > > ~# s3cmd ls > 2015-04-12 23:28 s3://bucket > ----------------------------------- > > But after the upgrade to Hammer, it doesn't work: > > ----------------------------------- > ~# s3cmd ls s3://bucket > ERROR: S3 error: 403 (SignatureDoesNotMatch): > > ~# s3cmd ls > 2015-04-12 23:28 s3://bucket > ----------------------------------- > > As you can see, the second command works but not the first. > [1] At the end of this message, I put the output of the first > command with the debug option, just in case. > >> Are you sure the below entries are correct ? Generally host_base and >> host_bucket should point to RGW FQDN in your case ceph-radosgw1 FQDN . >> ostore.athome.priv looks like a different host to me. >> >> host_base->ostore.athome.priv >> host_bucket->%(bucket)s.ostore.athome.priv > > For me it's ok: > > ----------------------------------- > ~# grep 'host_' ~/.s3cfg > host_base = ostore.athome.priv > host_bucket = %(bucket)s.ostore.athome.priv > ----------------------------------- > > And ostore.athome.priv is really my radosgw (see the dig > commands above). And when I try a s3cmd command, I can > see new lines in the apache logs of my radosgw. > > Thanks for your help Karan. > > [1] > > ----------------------------------- > ~# s3cmd -d ls s3://bucket > DEBUG: ConfigParser: Reading file '/root/.s3cfg' > DEBUG: ConfigParser: bucket_location->US > DEBUG: ConfigParser: cloudfront_host->ostore.athome.priv > DEBUG: ConfigParser: default_mime_type->binary/octet-stream > DEBUG: ConfigParser: delete_removed->False > DEBUG: ConfigParser: dry_run->False > DEBUG: ConfigParser: enable_multipart->True > DEBUG: ConfigParser: encoding->UTF-8 > DEBUG: ConfigParser: encrypt->False > DEBUG: ConfigParser: follow_symlinks->False > DEBUG: ConfigParser: force->False > DEBUG: ConfigParser: get_continue->False > DEBUG: ConfigParser: gpg_command->/usr/bin/gpg > DEBUG: ConfigParser: gpg_decrypt->%(gpg_command)s -d --verbose --no-use-agent > --batch --yes --passphrase-fd %(passphrase_fd)s -o %(output_file)s > %(input_file)s > DEBUG: ConfigParser: gpg_encrypt->%(gpg_command)s -c --verbose --no-use-agent > --batch --yes --passphrase-fd %(passphrase_fd)s -o %(output_file)s > %(input_file)s > DEBUG: ConfigParser: gpg_passphrase->...-3_chars... > DEBUG: ConfigParser: guess_mime_type->True > DEBUG: ConfigParser: host_base->ostore.athome.priv > DEBUG: ConfigParser: access_key->1Q...17_chars...Y > DEBUG: ConfigParser: secret_key->92...37_chars...W > DEBUG: ConfigParser: host_bucket->%(bucket)s.ostore.athome.priv > DEBUG: ConfigParser: human_readable_sizes->False > DEBUG: ConfigParser: invalidate_on_cf->False > DEBUG: ConfigParser: list_md5->False > DEBUG: ConfigParser: log_target_prefix-> > DEBUG: ConfigParser: mime_type-> > DEBUG: ConfigParser: multipart_chunk_size_mb->15 > DEBUG: ConfigParser: preserve_attrs->True > DEBUG: ConfigParser: progress_meter->True > DEBUG: ConfigParser: proxy_host-> > DEBUG: ConfigParser: proxy_port->0 > DEBUG: ConfigParser: recursive->False > DEBUG: ConfigParser: recv_chunk->4096 > DEBUG: ConfigParser: reduced_redundancy->False > DEBUG: ConfigParser: send_chunk->4096 > DEBUG: ConfigParser: simpledb_host->ostore.athome.priv > DEBUG: ConfigParser: skip_existing->False > DEBUG: ConfigParser: socket_timeout->300 > DEBUG: ConfigParser: urlencoding_mode->normal > DEBUG: ConfigParser: use_https->False > DEBUG: ConfigParser: verbosity->WARNING > DEBUG: ConfigParser: website_endpoint->http://%(bucket)s.ostore.athome.priv > DEBUG: ConfigParser: website_error-> > DEBUG: ConfigParser: website_index->index.html > DEBUG: Updating Config.Config encoding -> UTF-8 > DEBUG: Updating Config.Config follow_symlinks -> False > DEBUG: Updating Config.Config verbosity -> 10 > DEBUG: Unicodising 'ls' using UTF-8 > DEBUG: Unicodising 's3://bucket' using UTF-8 > DEBUG: Command: ls > DEBUG: Bucket 's3://bucket': > DEBUG: SignHeaders: 'GET\n\n\n\nx-amz-date:Mon, 13 Apr 2015 12:15:16 > +0000\n/bucket/' > DEBUG: CreateRequest: resource[uri]=/ > DEBUG: SignHeaders: 'GET\n\n\n\nx-amz-date:Mon, 13 Apr 2015 12:15:16 > +0000\n/bucket/' > DEBUG: Processing request, please wait... > DEBUG: get_hostname(bucket): bucket.ostore.athome.priv > DEBUG: format_uri(): /?delimiter=/ > DEBUG: Sending request method_string='GET', uri='/?delimiter=/', > headers={'content-length': '0', 'Authorization': 'AWS > 1QU7QGCIPM8NC4HE3VMY:mICckIc15h0xIHkpCUhguNqnhRo=', 'x-amz-date': 'Mon, 13 > Apr 2015 12:15:16 +0000'}, body=(0 bytes) > DEBUG: Response: {'status': 403, 'headers': {'date': 'Mon, 13 Apr 2015 > 12:15:16 GMT', 'accept-ranges': 'bytes', 'content-type': 'application/xml', > 'content-length': '87', 'server': 'Apache/2.4.7 (Ubuntu)'}, 'reason': > 'Forbidden', 'data': '<?xml version="1.0" > encoding="UTF-8"?><Error><Code>SignatureDoesNotMatch</Code></Error>'} > DEBUG: S3Error: 403 (Forbidden) > DEBUG: HttpHeader: date: Mon, 13 Apr 2015 12:15:16 GMT > DEBUG: HttpHeader: accept-ranges: bytes > DEBUG: HttpHeader: content-type: application/xml > DEBUG: HttpHeader: content-length: 87 > DEBUG: HttpHeader: server: Apache/2.4.7 (Ubuntu) > DEBUG: ErrorXML: Code: 'SignatureDoesNotMatch' > ERROR: S3 error: 403 (SignatureDoesNotMatch): > ----------------------------------- > > -- > François Lafont > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com