You only have 4 OSDs ? How much RAM per server ? I think you have already too many PG. Check your RAM usage.
Check on Ceph wiki guidelines to dimension the correct number of PGs. Remeber that everytime to create a new pool you add PGs into the system. Saverio 2015-04-14 17:58 GMT+02:00 Giuseppe Civitella <giuseppe.civite...@gmail.com>: > Hi all, > > I've been following this tutorial to realize my setup: > http://www.sebastien-han.fr/blog/2014/08/25/ceph-mix-sata-and-ssd-within-the-same-box/ > > I got this CRUSH map from my test lab: > http://paste.openstack.org/show/203887/ > > then I modified the map and uploaded it. This is the final version: > http://paste.openstack.org/show/203888/ > > When applied the new CRUSH map, after some rebalancing, I get this health > status: > [-> avalon1 root@controller001 Ceph <-] # ceph -s > cluster af09420b-4032-415e-93fc-6b60e9db064e > health HEALTH_WARN crush map has legacy tunables; mon.controller001 low > disk space; clock skew detected on mon.controller002 > monmap e1: 3 mons at > {controller001=10.235.24.127:6789/0,controller002=10.235.24.128:6789/0,controller003=10.235.24.129:6789/0}, > election epoch 314, quorum 0,1,2 controller001,controller002,controller003 > osdmap e3092: 4 osds: 4 up, 4 in > pgmap v785873: 576 pgs, 6 pools, 71548 MB data, 18095 objects > 8842 MB used, 271 GB / 279 GB avail > 576 active+clean > > and this osd tree: > [-> avalon1 root@controller001 Ceph <-] # ceph osd tree > # id weight type name up/down reweight > -8 2 root sed > -5 1 host ceph001-sed > 2 1 osd.2 up 1 > -7 1 host ceph002-sed > 3 1 osd.3 up 1 > -1 2 root default > -4 1 host ceph001-sata > 0 1 osd.0 up 1 > -6 1 host ceph002-sata > 1 1 osd.1 up 1 > > which seems not a bad situation. The problem rise when I try to create a new > pool, the command "ceph osd pool create sed 128 128" gets stuck. It never > ends. And I noticed that my Cinder installation is not able to create > volumes anymore. > I've been looking in the logs for errors and found nothing. > Any hint about how to proceed to restore my ceph cluster? > Is there something wrong with the steps I take to update the CRUSH map? Is > the problem related to Emperor? > > Regards, > Giuseppe > > > > > 2015-04-13 18:26 GMT+02:00 Giuseppe Civitella > <giuseppe.civite...@gmail.com>: >> >> Hi all, >> >> I've got a Ceph cluster which serves volumes to a Cinder installation. It >> runs Emperor. >> I'd like to be able to replace some of the disks with OPAL disks and >> create a new pool which uses exclusively the latter kind of disk. I'd like >> to have a "traditional" pool and a "secure" one coexisting on the same ceph >> host. I'd then use Cinder multi backend feature to serve them. >> My question is: how is it possible to realize such a setup? How can I bind >> a pool to certain OSDs? >> >> Thanks >> Giuseppe > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com