On 2015-06-02T17:23:58, gjprabu <gjpr...@zohocorp.com> wrote: > Hi Lars, > > We installed centos in client machines with kernel version is 3.10 > which is rbd supported modules. Now installed ocsfs2-tools and formated but > mount through error. Please check below.
You need to configure the ocfs2 cluster properly as well. You can use either o2cb (which I'm not familiar with anymore), or the pacemaker-integrated version: https://www.suse.com/documentation/sle_ha/book_sleha/data/sec_ha_ocfs2_create_service.html (should pretty much apply to CentOS as well). >From this point on, rbd is really just a shared block device, and you may have better success if you use the us...@clusterlabs.org mailing list if you wish to pursue this route. Regards, Lars -- Architect Storage/HA SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton, HRB 21284 (AG Nürnberg) "Experience is the name everyone gives to their mistakes." -- Oscar Wilde _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
