We have seen some communication issue with that, try to make all the server MTU 1500 and try out...
From: cameron.scr...@solnet.co.nz [mailto:cameron.scr...@solnet.co.nz] Sent: Tuesday, June 02, 2015 3:31 PM To: Somnath Roy Cc: ceph-users@lists.ceph.com; ceph-users; Joao Eduardo Luis Subject: Re: [ceph-users] Monitors not reaching quorum. (SELinux off, IPtables off, can see tcp traffic) We are running with Jumbo Frames turned on. Is that likely to be the issue? Do I need to configure something in ceph? The mon maps are fine and after setting debug to 10 and debug ms to 1, I see probe timeouts in the logs: http://pastebin.com/44M1uJZc I just set probe timeout to 10 (up from 2) and it still times out. Thanks! Cameron Scrace Infrastructure Engineer Mobile +64 22 610 4629 Phone +64 4 462 5085 Email cameron.scr...@solnet.co.nz<mailto:cameron.scr...@solnet.co.nz> Solnet Solutions Limited Level 12, Solnet House 70 The Terrace, Wellington 6011 PO Box 397, Wellington 6140 www.solnet.co.nz From: Somnath Roy <somnath....@sandisk.com<mailto:somnath....@sandisk.com>> To: Joao Eduardo Luis <j...@suse.de<mailto:j...@suse.de>>, "ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com>" <ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com>> Date: 03/06/2015 03:49 a.m. Subject: Re: [ceph-users] Monitors not reaching quorum. (SELinux off, IPtables off, can see tcp traffic) Sent by: "ceph-users" <ceph-users-boun...@lists.ceph.com<mailto:ceph-users-boun...@lists.ceph.com>> ________________________________ By any chance are you running with jumbo frame turned on ? Thanks & Regards Somnath -----Original Message----- From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of Joao Eduardo Luis Sent: Tuesday, June 02, 2015 12:52 AM To: ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> Subject: Re: [ceph-users] Monitors not reaching quorum. (SELinux off, IPtables off, can see tcp traffic) On 06/02/2015 01:42 AM, cameron.scr...@solnet.co.nz<mailto:cameron.scr...@solnet.co.nz> wrote: > I am trying to deploy a new ceph cluster and my monitors are not > reaching quorum. SELinux is off, firewalls are off, I can see traffic > between the nodes on port 6789 but when I use the admin socket to > force a re-election only the monitor I send the request to shows the > new election in its logs. My logs are filled entirely of the following > two > lines: > > 2015-06-02 11:31:56.447975 7f795b17a700 0 log_channel(audit) log > [DBG] > : from='admin socket' entity='admin socket' cmd='mon_status' args=[]: > dispatch > 2015-06-02 11:31:56.448272 7f795b17a700 0 log_channel(audit) log > [DBG] > : from='admin socket' entity='admin socket' cmd=mon_status args=[]: > finished You are running on default debug levels, so you'll hardly get anything more than that. I suggest setting 'debug mon = 10' and 'debug ms = 1' for added verbosity and come back to us with the logs. There are many reasons for this, but the more common are due to the monitors not being able to communicate with each other. Given you see traffic between the monitors, I'm inclined to assume that the other two monitors do not have each other on the monmap or, if they do know each other, either 1) the monitor's auth keys do not match, or 2) the probe timeout is being triggered before they successfully manage to find enough monitors to trigger an election -- which may be due to latency. Logs will tells us more. -Joao > Querying the admin socket with mon_status (the other two are the > similar but with their hostnames and rank): > > { > "name": "wcm1", > "rank": 0, > "state": "probing", > "election_epoch": 1, > "quorum": [], > "outside_quorum": [ > "wcm1" > ], > "extra_probe_peers": [], > "sync_provider": [], > "monmap": { > "epoch": 0, > "fsid": "adb8c500-122e-49fd-9c1e-a99af7832307", > "modified": "2015-06-02 10:43:41.467811", > "created": "2015-06-02 10:43:41.467811", > "mons": [ > { > "rank": 0, > "name": "wcm1", > "addr": "10.1.226.64:6789\/0" > }, > { > "rank": 1, > "name": "wcm2", > "addr": "10.1.226.65:6789\/0" > }, > { > "rank": 2, > "name": "wcm3", > "addr": "10.1.226.66:6789\/0" > } > ] > } > } _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com ________________________________ PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies). _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com Attention: This email may contain information intended for the sole use of the original recipient. Please respect this when sharing or disclosing this email's contents with any third party. If you believe you have received this email in error, please delete it and notify the sender or postmas...@solnetsolutions.co.nz<mailto:postmas...@solnetsolutions.co.nz> as soon as possible. The content of this email does not necessarily reflect the views of Solnet Solutions Ltd.
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
