On 07/17/2015 02:50 PM, Gregory Farnum wrote:
On Fri, Jul 17, 2015 at 1:13 PM, Kenneth Waegeman
<kenneth.waege...@ugent.be> wrote:
Hi all,
I've read in the documentation that OSDs use around 512MB on a healthy
cluster.(http://ceph.com/docs/master/start/hardware-recommendations/#ram)
Now, our OSD's are all using around 2GB of RAM memory while the cluster is
healthy.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
29784 root 20 0 6081276 2.535g 4740 S 0.7 8.1 1346:55 ceph-osd
32818 root 20 0 5417212 2.164g 24780 S 16.2 6.9 1238:55 ceph-osd
25053 root 20 0 5386604 2.159g 27864 S 0.7 6.9 1192:08 ceph-osd
33875 root 20 0 5345288 2.092g 3544 S 0.7 6.7 1188:53 ceph-osd
30779 root 20 0 5474832 2.090g 28892 S 1.0 6.7 1142:29 ceph-osd
22068 root 20 0 5191516 2.000g 28664 S 0.7 6.4 31:56.72 ceph-osd
34932 root 20 0 5242656 1.994g 4536 S 0.3 6.4 1144:48 ceph-osd
26883 root 20 0 5178164 1.938g 6164 S 0.3 6.2 1173:01 ceph-osd
31796 root 20 0 5193308 1.916g 27000 S 16.2 6.1 923:14.87 ceph-osd
25958 root 20 0 5193436 1.901g 2900 S 0.7 6.1 1039:53 ceph-osd
27826 root 20 0 5225764 1.845g 5576 S 1.0 5.9 1031:15 ceph-osd
36011 root 20 0 5111660 1.823g 20512 S 15.9 5.8 1093:01 ceph-osd
19736 root 20 0 2134680 0.994g 0 S 0.3 3.2 46:13.47 ceph-osd
[root@osd003 ~]# ceph status
2015-07-17 14:03:13.865063 7f1fde5f0700 -1 WARNING: the following dangerous
and experimental features are enabled: keyvaluestore
2015-07-17 14:03:13.887087 7f1fde5f0700 -1 WARNING: the following dangerous
and experimental features are enabled: keyvaluestore
cluster 92bfcf0a-1d39-43b3-b60f-44f01b630e47
health HEALTH_OK
monmap e1: 3 mons at
{mds01=10.141.16.1:6789/0,mds02=10.141.16.2:6789/0,mds03=10.141.16.3:6789/0}
election epoch 58, quorum 0,1,2 mds01,mds02,mds03
mdsmap e17218: 1/1/1 up {0=mds03=up:active}, 1 up:standby
osdmap e25542: 258 osds: 258 up, 258 in
pgmap v2460163: 4160 pgs, 4 pools, 228 TB data, 154 Mobjects
270 TB used, 549 TB / 819 TB avail
4152 active+clean
8 active+clean+scrubbing+deep
We are using erasure code on most of our OSDs, so maybe that is a reason.
But also the cache-pool filestore OSDS on 200GB SSDs are using 2GB of RAM.
Our erasure code pool (16*14 osds) have a pg_num of 2048; our cache pool
(2*14 OSDS) has a pg_num of 1024.
Are these normal values for this configuration, and is the documentation a
bit outdated, or should we look into something else?
2GB of RSS is larger than I would have expected, but not unreasonable.
In particular I don't think we've gathered numbers on either EC pools
or on the effects of the caching processes.
Which data is actually in memory of the OSDS?
Is this mostly cached data?
We are short on memory on these servers, can we have influence on this?
Thanks again!
Kenneth
-Greg
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
