"850 PRO" is a workstation drive. You shouldn't put it in the server... But it should not just die either way, so don't tell them you use it for Ceph next time.
Do the drives work when replugged? Can you get anything from SMART? Jan > On 18 Sep 2015, at 02:57, James (Fei) Liu-SSI <james....@ssi.samsung.com> > wrote: > > Hi Quentin, > Samsung has so different type of SSD for different type of workload with > different SSD media like SLC,MLC,TLC ,3D NAND etc. They were designed for > different workloads for different purposes. Thanks for your understanding and > support. > > Regards, > James > <> > From: ceph-users [mailto:ceph-users-boun...@lists.ceph.com > <mailto:ceph-users-boun...@lists.ceph.com>] On Behalf Of Quentin Hartman > Sent: Thursday, September 17, 2015 4:05 PM > To: Andrija Panic > Cc: ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com> > Subject: Re: [ceph-users] which SSD / experiences with Samsung 843T vs. Intel > s3700 > > I ended up having 7 total die. 5 while in service, 2 more when I hooked them > up to a test machine to collect information from them. To Samsung's credit, > they've been great to deal with and are replacing the failed drives, on the > condition that I don't use them for ceph again. Apparently they sent some of > my failed drives to an engineer in Korea and they did a failure analysis on > them and came to the conclusion they we put to an "unintended use". I have > seven left I'm not sure what to do with. > > I've honestly always really liked Samsung, and I'm disappointed that I wasn't > able to find anyone with their DC-class drives actually in stock so I ended > up switching the to Intel S3700s. My users will be happy to have some SSDs to > put in their workstations though! > > QH > > On Thu, Sep 17, 2015 at 4:49 PM, Andrija Panic <andrija.pa...@gmail.com > <mailto:andrija.pa...@gmail.com>> wrote: > Another one bites the dust... > > This is Samsung 850 PRO 256GB... (6 journals on this SSDs just died...) > > [root@cs23 ~]# smartctl -a /dev/sda > smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.10.66-1.el6.elrepo.x86_64] > (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > <http://smartmontools.sourceforge.net/> > > Vendor: /1:0:0:0 > Product: > User Capacity: 600,332,565,813,390,450 bytes [600 PB] > Logical block size: 774843950 bytes > >> Terminate command early due to bad response to IEC mode page > A mandatory SMART command failed: exiting. To continue, add one or more '-T > permissive' options > > On 8 September 2015 at 18:01, Quentin Hartman <qhart...@direwolfdigital.com > <mailto:qhart...@direwolfdigital.com>> wrote: > On Tue, Sep 8, 2015 at 9:05 AM, Mark Nelson <mnel...@redhat.com > <mailto:mnel...@redhat.com>> wrote: > A list of hardware that is known to work well would be incredibly > valuable to people getting started. It doesn't have to be exhaustive, > nor does it have to provide all the guidance someone could want. A > simple "these things have worked for others" would be sufficient. If > nothing else, it will help people justify more expensive gear when their > approval people say "X seems just as good and is cheaper, why can't we > get that?". > > So I have my opinions on different drives, but I think we do need to be > really careful not to appear to endorse or pick on specific vendors. The more > we can stick to high-level statements like: > > - Drives should have high write endurance > - Drives should perform well with O_DSYNC writes > - Drives should support power loss protection for data in motion > > The better I think. Once those are established, I think it's reasonable to > point out that certain drives meet (or do not meet) those criteria and get > feedback from the community as to whether or not vendor's marketing actually > reflects reality. It'd also be really nice to see more information available > like the actual hardware (capacitors, flash cells, etc) used in the drives. > I've had to show photos of the innards of specific drives to vendors to get > them to give me accurate information regarding certain drive capabilities. > Having a database of such things available to the community would be really > helpful. > > > That's probably a very good approach. I think it would be pretty simple to > avoid the appearance of endorsement if the data is presented correctly. > > > To that point, I think perhaps though something more important than a > list of known "good" hardware would be a list of known "bad" hardware, > > I'm rather hesitant to do this unless it's been specifically confirmed by the > vendor. It's too easy to point fingers (see the recent kernel trim bug > situation). > > I disagree. I think that only comes into play if you claim to know why the > hardware has problems. In this case, if you simply state "people who have > used this drive have experienced a large number of seemingly premature > failures when using them as journals" that provides sufficient warning to > users, and if the vendor wants to engage the community and potentially pin > down why and help us find a way to make the device work or confirm that it's > just not suited, then that's on them. Samsung seems to be doing exactly that. > It would be great to have them help provide that level of detail, but again, > I don't think it's necessary. We're not saying "ceph/redhat/$whatever says > this hardware sucks" we're saying "The community has found that using this > hardware with ceph has exhibited these negative behaviors...". At that point > you're just relaying experiences and collecting them in a central location. > It's up to the reader to draw conclusions from it. > > But again, I think more important than either of these would be a collection > of use cases with actual journal write volumes that have occurred in those > use cases so that people can make more informed purchasing decisions. The > fact that my small openstack cluster created 3.6T of writes per month on my > journal drives (3 OSD each) is somewhat mind-blowing. That's almost four > times the amount of writes my best guess estimates indicated we'd be doing. > Clearly there's more going on than we are used to paying attention to. > Someone coming to ceph and seeing the cost of DC-class SSDs versus > consumer-class SSDs will almost certainly suffer from some amount of sticker > shock, and even if they don't their purchasing approval people almost > certainly will. This is especially true for people in smaller organizations > where SSDs are still somewhat exotic. And when they come back with the "Why > won't cheaper thing X be OK?" they need to have sufficient information to > answer that. Without a test environment to generate data with, they will need > to rely on the experiences of others, and right now those experiences don't > seem to be documented anywhere, and if they are, they are not very > discoverable. > > QH > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com> > > > > -- > > Andrija Panić > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com>
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
