On 04/28/2017 08:23 AM, Frédéric Nass wrote:
Le 28/04/2017 à 15:19, Frédéric Nass a écrit :Hi Florian, Wido, That's interesting. I ran some bluestore benchmarks a few weeks ago on Luminous dev (1st release) and came to the same (early) conclusion regarding the performance drop with many small objects on bluestore, whatever the number of PGs is on a pool. Here is the graph I generated from the results: The test was run on a 36 OSDs cluster (3x R730xd with 12x 4TB SAS drives) with rocksdb and WAL on same SAS drives. Test consisted of multiple runs of the following command on a size 1 pool : rados bench -p pool-test-mom02h06-2 120 write -b 4K -t 128 --no-cleanupCorrection: test was made on a size 1 pool hosted on a single 12x OSDs node. The rados bench was run from this single host (to this single host). Frédéric.
If you happen to have time, I would be very interested to see what the compaction statistics look like in rocksdb (available via the osd logs). We actually wrote a tool that's in the cbt tools directory that can parse the data and look at what rocksdb is doing. Here's some of the data we collected last fall:
https://drive.google.com/open?id=0B2gTBZrkrnpZRFdiYjFRNmxLblUThe idea there was to try to determine how WAL buffer size / count and min_alloc size affected the amount of compaction work that rocksdb was doing. There are also some more general compaction statistics that are more human readable in the logs that are worth looking at (ie things like write amp and such).
The gist of it is that as you do lots of small writes the amount of metadata that has to be kept track of in rocksdb increases, and rocksdb ends up doing a *lot* of compaction work, with the associated read and write amplification. The only ways to really deal with this are to either reduce the amount of metadata (onodes, extents, etc) or see if we can find any ways to reduce the amount of work rocksdb has to do.
On the first point, increasing the min_alloc size in bluestore tends to help, but with tradeoffs. Any io smaller than the min_alloc size will be doubly-written like with filestore journals, so you trade reducing metadata for an extra WAL write. We did a bunch of testing last fall and at least on NVMe it was better to use a 16k min_alloc size and eat the WAL write than use a 4K min_alloc size, skip the WAL write, but shove more metadata at rocksdb. For HDDs, I wouldn't expect too bad of behavior with the default 64k min alloc size, but it sounds like it could be a problem based on your results. That's why it would be interesting to see if that's what's happening during your tests.
Another issue is that short lived WAL writes potentially can leak into level0 and cause additional compaction work. Sage has a pretty clever idea to fix this but we need someone knowledgeable about rocksdb to go in and try to implement it (or something like it).
Anyway, we still see a significant amount of work being done by rocksdb due to compaction, most of it being random reads. We actually spoke about this quite a bit yesterday at the performance meeting. If you look at a wallclock profile of 4K random writes, you'll see a ton of work being doing on compact (about 70% in total of thread 2):
https://paste.fedoraproject.org/paste/uS3LHRHw2Yma0iUYSkgKOl5M1UNdIGYhyRLivL9gydE=One thing we are still confused about is why rocksdb is doing random_reads for compaction rather than sequential reads. It would be really great if someone that knows rocksdb well could help us understand why it's doing this.
Ultimately for something like RBD I suspect the performance will stop dropping once you've completely filled the disk with 4k random writes. For RGW type work, the more tiny objects you add the more data rocksdb has to keep track of and the more rocksdb is going to slow down. It's not the same problem filestore suffers from, but it's similar in that the more keys/bytes/levels rocksdb has to deal with, the more data gets moved around between levels, the more background work that happens, the more likely we are waiting on rocksdb before we can write more data.
Mark
I hope this will improve as the performance drop seems more related to how many objects are in the pool (> 40M) rather than how many objects are written each second. Like Wido, I was thinking that we may have to increase the number of disks in the future to keep up with the needed performance for our Zimbra messaging use case. Or move datas from current EC pool to a replicated pool, as erasure coding doesn't help either for this type of use cases. Regards, Frédéric. Le 26/04/2017 à 22:25, Wido den Hollander a écrit :Op 24 april 2017 om 19:52 schreef Florian Haas <flor...@hastexo.com>: Hi everyone, so this will be a long email — it's a summary of several off-list conversations I've had over the last couple of weeks, but the TL;DR version is this question: How can a Ceph cluster maintain near-constant performance characteristics while supporting a steady intake of a large number of small objects? This is probably a very common problem, but we have a bit of a dearth of truly adequate best practices for it. To clarify, what I'm talking about is an intake on the order of millions per hour. That might sound like a lot, but if you consider an intake of 700 objects/s at 20 KiB/object, that's just 14 MB/s. That's not exactly hammering your cluster — but it amounts to 2.5 million objects created per hour.I have seen that the amount of objects at some point becomes a problem. Eventually you will have scrubs running and especially a deep-scrub will cause issues. I have never had the use-case to have a sustained intake of so many objects/hour, but it is interesting though.Under those circumstances, two things tend to happen: (1) There's a predictable decline in insert bandwidth. In other words, a cluster that may allow inserts at a rate of 2.5M/hr rapidly goes down to 1.8M/hr and then 1.7M/hr ... and by "rapidly" I mean hours, not days. As I understand it, this is mainly due to the FileStore's propensity to index whole directories with a readdir() call which is an linear-time operation. (2) FileStore's mitigation strategy for this is to proactively split directories so they never get so large as for readdir() to become a significant bottleneck. That's fine, but in a cluster with a steadily growing number of objects, that tends to lead to lots and lots of directory splits happening simultanously — causing inserts to slow to a crawl. For (2) there is a workaround: we can initialize a pool with an expected number of objects, set a pool max_objects quota, and disable on-demand splitting altogether by setting a negative filestore merge threshold. That way, all splitting occurs at pool creation time, and before another split were to happen, you hit the pool quota. So you never hit that brick wall causes by the thundering herd of directory splits. Of course, it also means that when you want to insert yet more objects, you need another pool — but you can handle that at the application level. It's actually a bit of a dilemma: we want directory splits to happen proactively, so that readdir() doesn't slow things down, but then we also *don't* want them to happen, because while they do, inserts flatline. (2) will likely be killed off completely by BlueStore, because there are no more directories, hence nothing to split. For (1) there really isn't a workaround that I'm aware of for FileStore. And at least preliminary testing shows that BlueStore clusters suffer from similar, if not the same, performance degradation (although, to be fair, I haven't yet seen tests under the above parameters with rocksdb and WAL on NVMe hardware).Can you point me to this testing of BlueStore?For (1) however I understand that there would be a potential solution in FileStore itself, by throwing away Ceph's own directory indexing and just rely on flat directory lookups — which should be logarithmic-time operations in both btrfs and XFS, as both use B-trees for directory indexing. But I understand that that would be a fairly massive operation that looks even less attractive to undertake with BlueStore around the corner. One suggestion that has been made (credit to Greg) was to do object packing, i.e. bunch up a lot of discrete data chunks into a single RADOS object. But in terms of distribution and lookup logic that would have to be built on top, that seems weird to me (CRUSH on top of CRUSH to find out which RADOS object a chunk belongs to, or some such?) So I'm hoping for the likes of Wido and Dan and Mark to have some alternate suggestions here: what's your take on this? Do you have suggestions for people with a constant intake of small objects?I have a bit of similar use-case. A customer needs to store a lot of objects (4M per TB) and we eventually went for a lot of smal(ler) disks instead of big disks. In this case we picked 3TB disks instead of 6 or 8TB so that we have a large number of OSDs, high number of PGs and thus have less objects per OSD. You are ingesting ~50GB/h. For how long are you keeping the objects in the cluster? What is the total TB storage you need? Would it work in this use-case to have a lot of OSDs on smaller disks? I think that in this you can partly overcome the problem by simply having more OSDs. WidoLooking forward to hearing your thoughts. Cheers, Florian _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com