It should be noted that the general advise is to not use such large objects since cluster performance will suffer, see also this thread: http://lists.ceph.com/pipermail/ceph-users-ceph.com/2017-September/021051.html
libradosstriper might be an option which will automatically break the object into smaller chunks On Fri, Nov 10, 2017 at 9:08 AM, Kevin Hrpcek <kevin.hrp...@ssec.wisc.edu> wrote: > Marc, > > If you're running luminous you may need to increase osd_max_object_size. > This snippet is from the Luminous change log. > > "The default maximum size for a single RADOS object has been reduced from > 100GB to 128MB. The 100GB limit was completely impractical in practice while > the 128MB limit is a bit high but not unreasonable. If you have an > application written directly to librados that is using objects larger than > 128MB you may need to adjust osd_max_object_size" > > Kevin > > On 11/09/2017 02:01 PM, Marc Roos wrote: > > > I would like store objects with > > rados -p ec32 put test2G.img test2G.img > > error putting ec32/test2G.img: (27) File too large > > Changing the pool application from custom to rgw did not help > > > > > > > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
