Hi Mark,
It will be interesting to know:
The impact of replication. I guess it will decrease by a higher factor
than the replica count.
I assume you mean the 30K IOPS per OSD is what the client sees, if so
the OSD raw disk itself will be doing more IOPS, is this correct and if
so what is the factor ( the less the better efficiency).
Are you running 1 OSD per physical drive or multiple..any
recommendations ?
Cheers /Maged
On 2017-11-10 18:51, Mark Nelson wrote:
> FWIW, on very fast drives you can achieve at least 1.4GB/s and 30K+ write
> IOPS per OSD (before replication). It's quite possible to do better but
> those are recent numbers on a mostly default bluestore configuration that I'm
> fairly confident to share. It takes a lot of CPU, but it's possible.
>
> Mark
>
> On 11/10/2017 10:35 AM, Robert Stanford wrote:
> Thank you for that excellent observation. Are there any rumors / has
> anyone had experience with faster clusters, on faster networks? I
> wonder how Ceph can get ("it depends"), of course, but I wonder about
> numbers people have seen.
>
> On Fri, Nov 10, 2017 at 10:31 AM, Denes Dolhay <de...@denkesys.com
> <mailto:de...@denkesys.com>> wrote:
>
> So you are using a 40 / 100 gbit connection all the way to your client?
>
> John's question is valid because 10 gbit = 1.25GB/s ... subtract
> some ethernet, ip, tcp and protocol overhead take into account some
> additional network factors and you are about there...
>
> Denes
>
> On 11/10/2017 05:10 PM, Robert Stanford wrote:
> The bandwidth of the network is much higher than that. The
> bandwidth I mentioned came from "rados bench" output, under the
> "Bandwidth (MB/sec)" row. I see from comparing mine to others
> online that mine is pretty good (relatively). But I'd like to get
> much more than that.
>
> Does "rados bench" show a near maximum of what a cluster can do?
> Or is it possible that I can tune it to get more bandwidth?
> |
> |
>
> On Fri, Nov 10, 2017 at 3:43 AM, John Spray <jsp...@redhat.com
> <mailto:jsp...@redhat.com>> wrote:
>
> On Fri, Nov 10, 2017 at 4:29 AM, Robert Stanford
> <rstanford8...@gmail.com <mailto:rstanford8...@gmail.com>> wrote:
>>
>> In my cluster, rados bench shows about 1GB/s bandwidth.
> I've done some
>> tuning:
>>
>> [osd]
>> osd op threads = 8
>> osd disk threads = 4
>> osd recovery max active = 7
>>
>>
>> I was hoping to get much better bandwidth. My network can
> handle it, and my
>> disks are pretty fast as well. Are there any major tunables
> I can play with
>> to increase what will be reported by "rados bench"? Am I
> pretty much stuck
>> around the bandwidth it reported?
>
> Are you sure your 1GB/s isn't just the NIC bandwidth limit of the
> client you're running rados bench from?
>
> John
>
>>
>> Thank you
>>
>> _______________________________________________
>> ceph-users mailing list
>> ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com>
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com>
>>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com>
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com <mailto:ceph-users@lists.ceph.com>
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> <http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com>
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@lists.ceph.com
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
