Hi Karun,
I too am experiencing something very similar with a PG stuck in activating+remapped state after re-introducing a OSD back into the cluster as Bluestore. Although this new OSD is not the one listed against the PG’s stuck activating. I also see the same thing as you where the up set is different to the acting set. Can I just ask what ceph version you are running and the output of ceph osd tree? From: ceph-users [mailto:[email protected]] On Behalf Of Karun Josy Sent: 13 December 2017 07:06 To: ceph-users <[email protected]> Subject: Re: [ceph-users] Health Error : Request Stuck Cluster is unusable because of inactive PGs. How can we correct it? ============= ceph pg dump_stuck inactive ok PG_STAT STATE UP UP_PRIMARY ACTING ACTING_PRIMARY 1.4b activating+remapped [5,2,0,13,1] 5 [5,2,13,1,4] 5 1.35 activating+remapped [2,7,0,1,12] 2 [2,7,1,12,9] 2 1.12 activating+remapped [1,3,5,0,7] 1 [1,3,5,7,2] 1 1.4e activating+remapped [1,3,0,9,2] 1 [1,3,0,9,5] 1 2.3b activating+remapped [13,1,0] 13 [13,1,2] 13 1.19 activating+remapped [2,13,8,9,0] 2 [2,13,8,9,1] 2 1.1e activating+remapped [2,3,1,10,0] 2 [2,3,1,10,5] 2 2.29 activating+remapped [1,0,13] 1 [1,8,11] 1 1.6f activating+remapped [8,2,0,4,13] 8 [8,2,4,13,1] 8 1.74 activating+remapped [7,13,2,0,4] 7 [7,13,2,4,1] 7 ==== Karun Josy On Wed, Dec 13, 2017 at 8:27 AM, Karun Josy <[email protected] <mailto:[email protected]> > wrote: Hello, We added a new disk to the cluster and while rebalancing we are getting error warnings. ============= Overall status: HEALTH_ERR REQUEST_SLOW: 1824 slow requests are blocked > 32 sec REQUEST_STUCK: 1022 stuck requests are blocked > 4096 sec ============== The load in the servers seems to be very low. How can I correct it? Karun
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
