Thank you! Ceph version is 12.2
Also, can you let me know the format to set osd_backfill_full_ratio ? Is it " ceph osd set -backfillfull-ratio .89 " ? Karun Josy On Thu, Jan 25, 2018 at 1:29 AM, Jean-Charles Lopez <jelo...@redhat.com> wrote: > Hi, > > if you are using an older Ceph version note that the > mon_osd_near_full_ration and mon_osd_full_ration must be set in the config > file on the MON hosts first and then the MONs restarted one after the other > one. > > If using a recent version there is a command ceph osd set-full-ratio and > ceph osd set-nearfull-ratio > > Regards > JC > > > On Jan 24, 2018, at 11:07, Karun Josy <karunjo...@gmail.com> wrote: > > > > Hi, > > > > I am trying to increase the full ratio of OSDs in a cluster. > > While adding a new node one of the new disk got backfilled to more than > 95% and cluster freezed. So I am trying to avoid it from happening again. > > > > > > Tried pg set command but it is not working : > > $ ceph pg set_nearfull_ratio 0.88 > > Error ENOTSUP: this command is obsolete > > > > I had increased the full ratio in osds using injectargs initially but it > didnt work as when the disk reached 95% it showed osd full status > > > > $ ceph tell osd.* injectargs '--mon_osd_full_ratio 0.97' > > osd.0: mon_osd_full_ratio = '0.970000' (not observed, change may require > restart) > > osd.1: mon_osd_full_ratio = '0.970000' (not observed, change may require > restart) > > ---- > > ---- > > > > How can I set full ratio to more than 95% ? > > > > Karun > > _______________________________________________ > > ceph-users mailing list > > ceph-users@lists.ceph.com > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
