Hi,
we have set the PGs to recover and now they are stuck in
active+recovery_wait+degraded and instructing them to deep-scrub does
not change anything. Hence, the rados report is empty. Is there a way to
stop the recovery wait to start the deep-scrub and get the output? I
guess the recovery_wait might be caused by missing objects. Do we need
to delete them first to get the recovery going?
Kevin
On 22.05.19 6:03 nachm., Robert LeBlanc wrote:
On Wed, May 22, 2019 at 4:31 AM Kevin Flöh <kevin.fl...@kit.edu
<mailto:kevin.fl...@kit.edu>> wrote:
Hi,
thank you, it worked. The PGs are not incomplete anymore. Still we
have
another problem, there are 7 PGs inconsistent and a cpeh pg repair is
not doing anything. I just get "instructing pg 1.5dd on osd.24 to
repair" and nothing happens. Does somebody know how we can get the
PGs
to repair?
Regards,
Kevin
Kevin,
I just fixed an inconsistent PG yesterday. You will need to figure out
why they are inconsistent. Do these steps and then we can figure out
how to proceed.
1. Do a deep-scrub on each PG that is inconsistent. (This may fix some
of them)
2. Print out the inconsistent report for each inconsistent PG. `rados
list-inconsistent-obj <PG_NUM> --format=json-pretty`
3. You will want to look at the error messages and see if all the
shards have the same data.
Robert LeBlanc
_______________________________________________
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com