Hi Orlando, Thank you for your confirmation. I hope somebody else helps about this issue.
Best regards, On Sat, Jun 1, 2019, 03:19 Moreno, Orlando <orlando.mor...@intel.com> wrote: > Hi, > > > > I have not received any response to this and I haven’t worked on this > lately. I hope to revisit RDMA messenger on Nautilus in the future. > > > > Thanks, > > Orlando > > > > > > *From:* Lazuardi Nasution [mailto:mrxlazuar...@gmail.com] > *Sent:* Saturday, May 25, 2019 9:14 PM > *To:* Moreno, Orlando <orlando.mor...@intel.com>; Tang, Haodong < > haodong.t...@intel.com> > *Cc:* Ceph Users <ceph-users@lists.ceph.com> > *Subject:* Re: ceph-users Digest, Vol 60, Issue 26 > > > > Hi Orlando and Haodong, > > > > Is there any response of this thread? I'm interested with this too. > > > > Best regards, > > > > Date: Fri, 26 Jan 2018 21:53:59 +0000 > From: "Moreno, Orlando" <orlando.mor...@intel.com> > To: "ceph-users@lists.ceph.com" <ceph-users@lists.ceph.com>, Ceph > Development <ceph-de...@vger.kernel.org> > Cc: "Tang, Haodong" <haodong.t...@intel.com> > Subject: [ceph-users] Ceph OSDs fail to start with RDMA > Message-ID: > < > 034aad465c6cbe4f96d9fb98573a79a63719e...@fmsmsx108.amr.corp.intel.com> > > Content-Type: text/plain; charset="us-ascii" > > Hi all, > > I am trying to bring up a Ceph cluster where the private network is > communicating via RoCEv2. The storage nodes have 2 dual-port 25Gb Mellanox > ConnectX-4 NICs, with each NIC's ports bonded (2x25Gb mode 4). I have set > memory limits to unlimited, can rping to each node, and > ms_async_rdma_device_name set to the ibdev (mlx5_bond_1). Everything goes > smoothly until I start bringing up OSDs. Nothing appears in stderr, but > upon further inspection of the OSD log, I see the following error: > > RDMAConnectedSocketImpl activate failed to transition to RTR state: (19) > No such device > /build/ceph-12.2.2/src/msg/async/rdma/RDMAConnectedSocketImpl.cc: In > function 'void RDMAConnectedSocketImpl::handle_connection()' thread > 7f908633c700 time 2018-01-26 10:47:51.607573 > /build/ceph-12.2.2/src/msg/async/rdma/RDMAConnectedSocketImpl.cc: 221: > FAILED assert(!r) > > ceph version 12.2.2 (cf0baeeeeba3b47f9427c6c97e2144b094b7e5ba) luminous > (stable) > 1: (ceph::__ceph_assert_fail(char const*, char const*, int, char > const*)+0x102) [0x564a2ccf7892] > 2: (RDMAConnectedSocketImpl::handle_connection()+0xb4a) [0x564a2d007fba] > 3: (EventCenter::process_events(int, std::chrono::duration<unsigned long, > std::ratio<1l, 1000000000l> >*)+0xa08) [0x564a2cd9a418] > 4: (()+0xb4f3a8) [0x564a2cd9e3a8] > 5: (()+0xb8c80) [0x7f9088c04c80] > 6: (()+0x76ba) [0x7f90892f36ba] > 7: (clone()+0x6d) [0x7f908836a41d] > NOTE: a copy of the executable, or `objdump -rdS <executable>` is needed > to interpret this. > > Anyone see this before or have any suggestions? > > Thanks, > Orlando > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
