Isn't that why you suppose to test up front? So you do not have shocking surprises? You can find in the mailing list archives some performance references also. I think it would be good to publish some performance results on the ceph.com website. Can’t be to difficult to put some default scenarios, used hardware and performance there in some nice graphs. I take it some here would be willing to contribute test results of their test/production clusters. This way new ceph’ers know what to expect from similar setups.
-----Original Message----- From: Jordan Share [mailto:readm...@krotus.com] Sent: maandag 15 juli 2019 20:16 To: ceph-users@lists.ceph.com Subject: Re: [ceph-users] Returning to the performance in a small cluster topic We found shockingly bad committed IOPS/latencies on ceph. We could get roughly 20-30 IOPS when running this fio invocation from within a vm: fio --name=seqwrite --rw=write --direct=1 --ioengine=libaio --bs=32k --numjobs=1 --size=2G --runtime=60 --group_reporting --fsync=1 For non-committed IO, we get about 2800 iops, with this invocation: fio --name=seqwrite --rw=write --direct=1 --ioengine=libaio --bs=32k --numjobs=1 --size=2G --runtime=150 --group_reporting So, maybe, if PostreSQL has a lot of committed IO needs, you might not have the performance you're expecting. You could try running your fio tests with "--fsync=1" and see if those numbers (which I'd expect to be very low) would be in line with your PostgreSQL performance. Jordan On 7/15/2019 7:08 AM, Drobyshevskiy, Vladimir wrote: > Dear colleagues, > > I would like to ask you for help with a performance problem on a > site backed with ceph storage backend. Cluster details below. > > I've got a big problem with PostgreSQL performance. It runs inside > a VM with virtio-scsi ceph rbd image. And I see constant ~100% disk > load with up to hundreds milliseconds latencies (via atop) even when > pg_top shows 10-20 tps. All other resources are almost untouched - > there is a lot of memory and free CPU cores, DB fits memory but still > has performance issues. > > The cluster itself: > nautilus > 6 nodes, 7 SSD with 2 OSDs per SSD (14 OSDs in overall). > Each node: 2x Intel Xeon E5-2665 v1 (governor = performance, > powersaving disabled), 64GB RAM, Samsung SM863 1.92TB SSD, QDR Infiniband. > > I've made fio benchmarking with three type of measures: > a VM with virtio-scsi driver, > baremetal host with mounted rbd image > and the same baremetal host with mounted lvm partition on SM863 SSD > drive. > > I've set bs=8k (as Postgres writes 8k blocks) and tried 1 and 8 jobs. > > Here are some results: https://pastebin.com/TFUg5fqA > Drives load on the OSD hosts are very low, just a few percent. > > Here is my ceph config: https://pastebin.com/X5ZwaUrF > > Numbers don't look very good from my point of view but they are > also not really bad (are they?). But I don't really know the next > direction I can go to solve the problem with PostgreSQL. > > I've tried to make an RAID0 with mdraid and 2 virtual drives but > haven't noticed any difference. > > Could you please tell me: > Are these performance numbers good or bad according to the hardware? > Is it possible to tune anything more? May be you can point me to > docs or other papers? > Does any special VM tuning for the PostgreSQL\ceph cooperation exist? > Thank you in advance! > > -- > Best regards, > Vladimir > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com