Hi Fred,
you could try to put "target 25ms" without the quotes into the advanced egress
options field in the "Queue Discipline" tab, that is exposed after checking
"Show Dangerous Configuration". I would love to hear whether that worked or not
(I am not able to test anything myself). Maybe posting the output of "tc -d
qdisc" and "tc class show dev ge00" would help. Good luck…
Best Regards
Sebastian
On Dec 27, 2013, at 20:20 , Fred Stratton <[email protected]> wrote:
> I have been using pie for approximately 3 weeks.
>
> You are correct, in that the outbound speed is about 800 - 900 kb/s.
>
> I shall try what you suggest, but do not know how to express the target of 25
> ms as a configuration option.
>
>
> On 27/12/13 19:15, Dave Taht wrote:
>> Dear fred: are you sticking with pie? I was going to suggest you try fq
>> codel with a target 25ms on your outbound. (You are at 800kbit or so as best
>> I recall?)
>>
>> On Dec 27, 2013 11:10 AM, "Fred Stratton" <[email protected]> wrote:
>> I upgraded to 3.10.24-8 on 2013-12-23.
>>
>> I modified /etc/fixdaemons, adding
>> /etc/init.d/sqm restart
>>
>> input the appropriate sqm settings, transcribed from aqm
>>
>> rebooted
>>
>> and the build works very well. For ADSL2+ here, it is the best so far.
>>
>>
>> On 27/12/13 18:55, Dave Taht wrote:
>>> A race condition appears to have crept in...
>>>
>>> ---------- Forwarded message ----------
>>> From: "Dave Taht" <[email protected]>
>>> Date: Dec 27, 2013 10:47 AM
>>> Subject: Re: [Cerowrt-devel] CeroWrt 3.10.24-8 badly bloated?
>>> To: "Richard E. Brown" <[email protected]>
>>> Cc:
>>>
>>> Probably didn't start sqm properly
>>>
>>> Restart it by hand via /etc/init.d/sqm restart
>>>
>>> tc -s qdisc show dev ge00
>>>
>>> Should show htb and fq codel.
>>>
>>> On Dec 27, 2013 10:36 AM, "Rich Brown" <[email protected]> wrote:
>>> So I screwed up my courage and replaced my 3.10.18-? firmware in my primary
>>> router with 3.10.24-8. That version had worked well as a secondary, so I
>>> figured, What the heck… Let’s give it try.
>>>
>>> The result was not pretty. I set my link speeds in the SQM page, chose the
>>> defaults for the Queue Discipline tab, and link layer to ATM with no
>>> additional overhead for my DSL link.
>>>
>>> Ping times to google are normally ~51-54 msec. But when I fired up
>>> speedtest.net, they jumped to 1500-2500 msec. Is there something I should
>>> look at before reverting? Thanks.
>>>
>>> Rich
>>> _______________________________________________
>>> Cerowrt-devel mailing list
>>> [email protected]
>>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>
>>>
>>> _______________________________________________
>>> Cerowrt-devel mailing list
>>>
>>> [email protected]
>>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>
>
> _______________________________________________
> Cerowrt-devel mailing list
> [email protected]
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
_______________________________________________
Cerowrt-devel mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cerowrt-devel
