This was a test taken *during* a 2 minute rrul_be test. http://www.dslreports.com/speedtest/320377
Flient (formerly netperf-wrapper) data here: http://snapon.lab.bufferbloat.net/~d/lorna-wifi.tgz Puzzle over this! http://snapon.lab.bufferbloat.net/~d/lorna-wifi/reconcile_this.png and the rawer data.... in comparison to this and other of these new speedtest reports. There are a couple other tests of the same link in the same configuration (laptop on lap 10 feet from the access point through a wall) [1] in the same dir testing upload and download (without simultaneously running the new dslreport tests) CDF plots are nice. So are mountain plots. http://snapon.lab.bufferbloat.net/~d/lorna-wifi/wifi_download.png [1] I was trying for comfort^H^H^H^H^^H^H^H^Hrealism On Sun, Apr 19, 2015 at 1:29 AM, Dave Taht <[email protected]> wrote: > This test was taken on linux, about 20 feet and one room away from the > access point: > > http://www.dslreports.com/speedtest/320328 > > This was taken on the same box, about 10 feet and one room from the > access point. > > http://www.dslreports.com/speedtest/320340 > > In all cases, the uplink is a comcast box configured for 55Mbit down, > 5Mbit up and just to make it weird this is a two router configuration, > where the nearest hop is over a powerline box (TP600) before hitting > the net. > > I *like* that the test does not let you switch browser tabs (something > I do instinctively when something takes longer than 3 seconds.) > > > > > On Sat, Apr 18, 2015 at 5:57 PM, Rich Brown <[email protected]> wrote: >> Folks, >> >> I am delighted to pass along the news that Justin has added latency >> measurements into the Speed Test at DSLReports.com. >> >> Go to: https://www.dslreports.com/speedtest and click the button for your >> Internet link. This controls the number of simultaneous connections that get >> established between your browser and the speedtest server. After you run the >> test, click the green "Results + Share" button to see detailed info. For the >> moment, you need to be logged in to see the latency results. There's a >> "register" link on each page. >> >> The speed test measures latency using websocket pings: Justin says that a >> zero-latency link can give 1000 Hz - faster than a full HTTP ping. I just >> ran a test and got 48 msec latency from DSLReports, while ping gstatic.com >> gave 38-40 msec, so they're pretty fast. >> >> You can leave feedback on this page - >> http://www.dslreports.com/forum/r29910594-FYI-for-general-feedback-on-the-new-speedtest >> - or wait 'til Justin creates a new Bufferbloat topic on the forums. >> >> Enjoy! >> >> Rich >> _______________________________________________ >> Bloat mailing list >> [email protected] >> https://lists.bufferbloat.net/listinfo/bloat > > > > -- > Dave Täht > Open Networking needs **Open Source Hardware** > > https://plus.google.com/u/0/+EricRaymond/posts/JqxCe2pFr67 -- Dave Täht Open Networking needs **Open Source Hardware** https://plus.google.com/u/0/+EricRaymond/posts/JqxCe2pFr67 _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
