On Fri, Oct 23, 2015 at 1:18 PM, Richard Smith <smithb...@gmail.com> wrote:
> On 10/23/2015 02:41 PM, Michael Richardson wrote: > >> Richard Smith <smithb...@gmail.com> wrote: >> > My test setup: >> >> > Laptop<--1000BaseT-->DUT<--1000baseT-->Server >> >> So, given that the DUT is the only real constraint in the network, what >> do you expect to see from this setup? >> > > > Setting ingress/egress to 10Mbit/s I expected to see the speed >> measurements bounce around those limits with the ping times staying in the >> low double digits of ms. What I saw however, was the data rates going well >> past 10Mbit limit and pings up to 2000 ms. >> > > This is what I've seen in prior rrul testing using a the 50/10 cable link > at our office and my 25(ish)/6 link at my apartment and a well connected > server on the net. That however was using QoS and not SQM. > > Its that a reasonable expectation? It is, and it's what you should have seen, so I think that it wasn't _actually_ running. I don't remember if I had to reboot or not after installing both sqm_scripts and luci_sqm_scripts on my WRT1900AC. But the request earlier to run "tc" to show the qdiscs will tell you if it's really setup right or not. -Aaron
_______________________________________________ Cerowrt-devel mailing list Cerowrt-devel@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/cerowrt-devel
