I have pulled my old computer out of storage after several years and I'm trying to get it running again. After reseating the memory, it has booted fine, but the BIOS has reset and it is running at auto clock speeds.
I don't remember the cpu(I know it is an Athlon), nor do I remember the clock speeds for the memory I have in there. The CPU is showing up at 1300 MHz, but I think it was faster than that, though I could be wrong. I hate to pull the cpu fan as I know there is thermal compound on there and would hate to screw things up by taking stuff apart then retightening. If there is any way to get the specs with software or some other method, that would be the ideal solution. I have pulled the memory and searched online, but could not find the information or clock speeds for it. I have a 512 Corsair XMS CM512-3500C2 XMS3500v1.1 024001 and two sticks of 256 Kingston Value RAM KVR400AK2/512R 740617072679 K2 2.6v. I would like it clocked as fast as it can handle so I get the most I can out of my system. It will be a little while before I can afford to get my new system, so this will be my primary development box for a while. Any help would be appreciated. Thanks. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;207172674;29440083;f Archive: http://www.houseoffusion.com/groups/cf-community/message.cfm/messageid:273857 Subscription: http://www.houseoffusion.com/groups/cf-community/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.5
